
The AirTAC GFC400-15 Combination Unit (GFC40015C3TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
GFC40015C3TK is an AirTAC G-series two-unit air treatment set: a filter regulator and a lubricator paired as one 2-piece combination. This size 400 unit has 1/2 in NPT ports, a 40 um filter element and a differential-pressure drain on the filter bowl. The regulator adjusts from 0.15-0.9 MPa (20-130 psi) and the external round gauge reads in bar. A fitted reverse (check) valve holds downstream pressure when the upstream supply is shut off. Bowls on the 400 size are PC (polycarbonate); maximum working pressure is 1.0 MPa (145 psi) and operating temperature is -5 to 70 C, non-freezing. The medium is compressed air only.
This is a genuine AirTAC part. The G series runs from size 200 to 600 with ports from 1/8 to 1 in, plus catalogue options for drain type (differential-pressure, automatic or manual), 40 um or 5 um filtration, gauge style and scale, and G (BSPP) or NPT threads. Flow for the series is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | AirTAC GFC400-15 Combination Unit (GFC40015C3TK) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-15 |
| Build order | Filter regulator first, lubricator last |
Feeds filtered, regulated and lubricated air to the pneumatic clamp cylinders around a press cell. The fitted check valve holds downstream pressure if the main supply is isolated mid-cycle.
Supplies the valve and actuator banks on a filling and capping machine from one treatment point, with the lubricator metering oil mist to the cylinders.
Runs the divert and pusher cylinders on a sortation conveyor, keeping water and particulate out of the valves that switch the diverters.
Size 400 with NPT1/2 ports sits in the upper half of the G range (sizes 200 to 600, ports 1/8 to 1 in) - step up or down a size if your line's porting and demand differ. Drain type is a real choice on the filter bowl: differential-pressure (this unit, the default), automatic (code A) or manual (code M). Filtration is 40 um standard; choose 5 um (code W) for finer cleaning. Gauge: this unit carries the external round gauge with a bar scale; the embedded square gauge in MPa, psi or bar scales is also available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.
AirTAC publishes G-series flow as curves, not a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the flow and full datasheet for this model on request before you order.
K means a reverse (check) valve is fitted, so downstream pressure is held if the upstream supply is cut. Without K the unit has no check valve. It is independent of the drain type, filter grade and gauge choices in the rest of the code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.