verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC400 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC400-15 Combination Unit (GFC40015MF1TK)

The AirTAC GFC400-15 Combination Unit (GFC40015MF1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1/2"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade40 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$139.06 $146.56Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC400-15 drain, gauge and thread option on one page All GFC400-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC400-15 Combination Unit (GFC40015MF1TK)

The AirTAC GFC40015MF1TK is a genuine two-unit air-treatment set: a filter regulator plus a separate lubricator, filtering water and particulate, regulating downstream pressure and metering oil mist, with the K suffix adding a reverse (check) valve that holds downstream pressure if the supply side drops. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum inlet pressure is 1.0 MPa (145 psi); with the manual-drain set the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi); working temperature is -5 to 70 C (non-freezing); compressed air is the only medium.

This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes, covering ports from 1/8" to 1", with differential-pressure (default), automatic or manual drains, 40 um standard or 5 um (W) elements, and G (BSPP) or NPT threads as catalogue options. Flow is published as curves rather than a single rated figure, so we confirm flow and other datasheet values on request.

AirTAC GFC400-15 Combination Unit (GFC40015MF1TK) Technical Specifications

ModelAirTAC GFC400-15 Combination Unit (GFC40015MF1TK)
SeriesGFC400 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1/2" (NPT thread)
Filtering grade40 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC400-15 Combination Unit (GFC40015MF1TK)

GFC400G-series two-unit set, 400 body — sets the port range.
15Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC400 · PT1/2" · 40 µm
One size downGFC300
One size upGFC600
Three-unit equivalentGC400-15
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC400-15 Combination Unit (GFC40015MF1TK) Is Used

bolt

Clamping fixtures with pressure hold

Serves pneumatic clamps on a machining or welding fixture where the check valve keeps the clamp circuit pressurized if the shop-air supply is interrupted, so parts stay held until power is restored.

precision_manufacturing

Pick-and-place robot grippers

Feeds the gripper cylinders on a robotic pick-and-place cell; filtration and oil mist protect the gripper valves while the reverse valve helps the part stay gripped through a momentary supply dip.

settings_input_component

Pneumatic control cabinet supply

Conditions the incoming 1/2" air line of a machine's pneumatic control cabinet, feeding the valve manifold with filtered, regulated, lubricated air and holding set pressure downstream via the check valve.

Is the AirTAC GFC400-15 Combination Unit (GFC40015MF1TK) the Right Set?

Match the 200/300/400/600 size to the port and air demand of the circuit; the 400 size at NPT1/2" fits mid-to-high demand lines. The K suffix fits a reverse (check) valve - specify it where actuators must keep their pressure if the upstream supply is cut. Drain is manual here; automatic (A) or differential-pressure (default) versions exist for unattended draining. The element is the 40 um standard; the W suffix gives a 5 um element. The embedded square gauge reads MPa, external round gauges in MPa/psi/bar are optional, G (BSPP) and NPT threads are order options, and the bracket is included unless the J suffix is specified. Flow is published only as curves, so share your flow demand and we will confirm sizing against the datasheet before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.

AirTAC GFC400-15 Combination Unit (GFC40015MF1TK) FAQ

AirTAC publishes G-series flow as curves rather than a single rated number, and the fitted reverse valve adds a small pressure-loss consideration. Send us your application flow and we will confirm the sizing against the datasheet on request.

K means a reverse (check) valve is fitted: air flows normally through the filter regulator and lubricator, but if the upstream supply drops, the valve holds the downstream pressure instead of letting it bleed back. The same set without K leaves that position empty.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC400-15 Combination Unit (GFC40015MF1TK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC40015MF1TK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.