verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC400 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK)

The AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1/2"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$139.06 $146.56Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC400-15 drain, gauge and thread option on one page All GFC400-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK)

The AirTAC GFC40015MF1WTK is a genuine two-unit air-treatment set: a filter regulator plus a separate lubricator, filtering, regulating and oil-mist lubricating, with the W suffix specifying the finer 5 um filter element and the K suffix fitting a reverse (check) valve that holds downstream pressure if the supply drops. It is built for NPT1/2" ports, with a manual drain on the polycarbonate filter bowl and an embedded square pressure gauge reading in MPa. Maximum inlet pressure is 1.0 MPa (145 psi); with the manual-drain set the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi); working temperature is -5 to 70 C (non-freezing); compressed air is the only medium.

This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes, covering ports from 1/8" to 1", with differential-pressure (default), automatic or manual drains, 40 um or 5 um elements, and G (BSPP) or NPT threads as catalogue options. Flow is published as curves rather than a single rated figure, so we confirm flow and other datasheet values on request.

AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK) Technical Specifications

ModelAirTAC GFC400-15 Combination Unit (GFC40015MF1WTK)
SeriesGFC400 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1/2" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK)

GFC400G-series two-unit set, 400 body — sets the port range.
15Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC400 · PT1/2" · 5 µm
One size downGFC300
One size upGFC600
Three-unit equivalentGC400-15
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK) Is Used

view_module

Assembly cell clamping modules

Feeds the 5 um-filtered, regulated, lubricated air demand of multi-station clamping modules on an assembly line, with the check valve holding each station's pressure through supply dips.

engineering

Test rig actuator circuits

Supplies the pneumatic load actuators of a production test rig, where the 5 um element protects sensitive positioning valves and the reverse valve preserves the set pressure if the shop-air header is switched.

build

Textile machine air preparation

Prepares the 1/2" air on textile machinery drives and doffer cylinders: finely filtered and lubricated to keep fast-cycling valves clean, with pressure held downstream via the check valve.

Is the AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK) the Right Set?

Choose the 200/300/400/600 size by port and air demand; this 400 unit at NPT1/2" fits mid-to-high demand circuits. The W suffix selects the 5 um element where the 40 um standard is too coarse, and the K suffix fits a reverse (check) valve for circuits that must hold pressure through a supply interruption - both are decodable choices, so drop either suffix if not needed. Drain is manual here; automatic (A) and differential-pressure (default) versions exist. The embedded square gauge reads MPa, external round gauges with MPa/psi/bar scales are available, G (BSPP) and NPT threads are order options, and the bracket is included unless the J suffix is specified. Flow is published only as curves, so share your flow demand and we will confirm sizing against the datasheet before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.

AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK) FAQ

AirTAC publishes G-series flow as curves rather than a single rated number, and the fitted reverse valve adds a small pressure-loss consideration. Send us your application flow and we will confirm the sizing against the datasheet on request.

W specifies the finer 5 um filter element for cleanliness-sensitive equipment, while K fits a reverse (check) valve that holds downstream pressure when the supply drops. They are independent decodable options on the same filter-regulator-plus-lubricator set - drop either suffix when the feature is not needed.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC400-15 Combination Unit (GFC40015MF1WTK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC40015MF1WTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.