
The AirTAC GFC400-15 Combination Unit (GFC40015MLC1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
GFC40015MLC1T is a genuine AirTAC G-series two-unit set: a filter regulator and a lubricator supplied as two matched 1/2 in. NPT-threaded units. The filter stage removes water and particulate to the standard 40 um grade with a manual-drain bowl; the regulator stage is the L low-pressure type, intended where downstream settings sit below the standard range - we confirm the exact adjustment window for this build from the datasheet on request; the lubricator meters oil mist into the air. Pressure is read on the external round gauge scaled in MPa. Maximum inlet pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Size 400 units use polycarbonate bowls. Flow is published as curves rather than a single rated figure, so we confirm datasheet and sizing figures on request.
| Model | AirTAC GFC400-15 Combination Unit (GFC40015MLC1T) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-15 |
| Build order | Filter regulator first, lubricator last |
Holding a gentle, closely controlled air pressure on the loading cylinders of web-tension rollers in a film or paper converting line, where high settings would crush the web.
Conditioning the low-pressure atomising and diaphragm-pump air in a spray-finishing booth, with the lubricator reserved for the pump air leg.
Feeding bead-breaker and inflation circuits in a vehicle-workshop air ring, where low regulated settings and clean, lubricated air protect the tools and the tyre.
Choose this 400-size, 1/2 in. set when your circuit needs gentler regulated settings than the standard type - the L code marks the low-pressure regulator, and we will confirm its adjustment range against the datasheet before you order. The M code sets a manual drain (blank is differential-pressure, A is automatic), and the filter grade is the standard 40 um; add W for a 5 um element. The gauge here is the external round type in MPa; the embedded square gauge and psi or bar scales are catalogue alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. specify the bracket where mounting is needed. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.
AirTAC publishes G-series performance as flow curves rather than one rated figure, so no single number is quoted here. Share your working pressure and demand and we will confirm the sizing from the datasheet on request before you order.
The L in the code specifies the low-pressure type of regulator, chosen when the working settings sit below the standard range. The M sets a manual drain (blank is differential-pressure, A is automatic), and C1 specifies the external round gauge in MPa. We confirm the exact adjustment window for the low-pressure build on request.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.