verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC400 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC400-15 Combination Unit (GFC40015MLF1T)

The AirTAC GFC400-15 Combination Unit (GFC40015MLF1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1/2"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade40 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$124.12 $131.62Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC400-15 drain, gauge and thread option on one page All GFC400-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC400-15 Combination Unit (GFC40015MLF1T)

GFC40015MLF1T is an AirTAC G-series two-unit air preparation set: a filter regulator plus a separate lubricator mounted as one 2-piece combination. The filter-regulator section removes water and particulate from compressed air and holds downstream pressure steady, while the lubricator adds an oil mist for tools and cylinders. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

It is a genuine AirTAC part from the G series, which spans 200, 300, 400 and 600 sizes with port choices and G (BSPP) or NPT thread options to order. The 400-size bowls on both the filter-regulator and the lubricator are polycarbonate (PC), suited to compressed air from -5 to 70 C, and the manual drain allows regulator adjustment from 0.05 to 0.9 MPa (7-130 psi). Rated flow is published as curves rather than a single figure, so ask us and we will confirm the datasheet numbers for your application.

AirTAC GFC400-15 Combination Unit (GFC40015MLF1T) Technical Specifications

ModelAirTAC GFC400-15 Combination Unit (GFC40015MLF1T)
SeriesGFC400 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1/2" (NPT thread)
Filtering grade40 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeLow-pressure type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, MPa scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC400-15 Combination Unit (GFC40015MLF1T)

GFC400G-series two-unit set, 400 body — sets the port range.
15Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
LLow-pressure type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC400 · PT1/2" · 40 µm
One size downGFC300
One size upGFC600
Three-unit equivalentGC400-15
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC400-15 Combination Unit (GFC40015MLF1T) Is Used

factory

Automated assembly cell air supply

Feeding filtered, regulated and lubricated air to the cylinder and gripper circuits of a robotic assembly cell, with the manual drain letting maintenance clear condensate at shift start.

conveyor_belt

Packaging line carton sealing

Supplying the pneumatic taping and flap-folding heads on a carton sealing conveyor, where the lubricator keeps cylinder seals moving smoothly through long production runs.

valve

Process valve actuation skid

Preparing air for pneumatic quarter-turn valve actuators on a process skid, with the embedded square MPa gauge giving operators a local setpoint check at the panel.

Is the AirTAC GFC400-15 Combination Unit (GFC40015MLF1T) the Right Set?

Size steps 200/300/400/600 trade port diameter against flow, so choose this 400-size 1/2 in set when your circuit needs the larger port. The M drain is manual: you vent collected water by hand, and manual-drain units allow the widest regulator setting range, 0.05-0.9 MPa (7-130 psi). The filter grade here is the standard 40 um element; pick the W code for 5 um when finer filtration matters. The square gauge reads in MPa; other scales and G/NPT threads are order options. Flow is published as curves, not a single rating, so let us confirm sizing against your application before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.

AirTAC GFC400-15 Combination Unit (GFC40015MLF1T) FAQ

AirTAC publishes G-series flow as performance curves, not as a single rated figure, so we do not quote a number. Tell us your line conditions and we will confirm the datasheet flow curves for this 400-size, 1/2 in NPT set on request.

M is the manual drain: you open the bowl drain by hand to discharge collected water. Manual-drain units also allow the widest regulator setting range, 0.05-0.9 MPa (7-130 psi). Automatic and differential-pressure drain variants are available if you prefer hands-off draining.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC400-15 Combination Unit (GFC40015MLF1T)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC40015MLF1T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.