
The AirTAC GFC400-15 Combination Unit (GFC40015MLF1WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
GFC40015MLF1WT is an AirTAC G-series two-unit air preparation set: a filter regulator plus a separate lubricator as one 2-piece combination. The filter-regulator section strips water and particulate from compressed air and holds downstream pressure steady, while the lubricator meters an oil mist to downstream tools and cylinders. The W suffix selects the finer 5 um filter element; the rest of the code decodes to a 400-size unit with 1/2 in NPT ports, a manual drain, the low-pressure regulator type, and an embedded square gauge scaled in MPa.
It is a genuine AirTAC part from the G series, which spans 200, 300, 400 and 600 sizes with port choices and G (BSPP) or NPT thread options to order. The polycarbonate (PC) bowls on both sections suit compressed air from -5 to 70 C, and the manual drain allows regulator adjustment from 0.05 to 0.9 MPa (7-130 psi). Rated flow is published as curves rather than a single figure, so ask us and we will confirm the datasheet numbers for your application.
| Model | AirTAC GFC400-15 Combination Unit (GFC40015MLF1WT) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-15 filter regulator and GL400-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-15 |
| Build order | Filter regulator first, lubricator last |
Conditioning the air feeding sample-handling cylinders and small actuators on laboratory automation benches, where the 5 um element helps keep fine pilot valves clean.
Supplying the tool-clamp and tool-change cylinders on a CNC machining center, with the lubricator maintaining the air motor and the square MPa gauge anchoring the setpoint.
Running the gating, stopping and diverting cylinders along a bottling conveyor, with the manual drain cleared at changeover and the 5 um element guarding the directional valves.
This 400-size set carries the 5 um W-grade element, the finer of the two published grades (the standard is 40 um), which suits circuits where cleaner air protects sensitive valves and instruments. The M drain is manual: condensate is vented by hand, and manual-drain units allow the widest regulator setting range, 0.05-0.9 MPa (7-130 psi). The square gauge reads in MPa; other scales, G/NPT threads and the other size/port steps (200/300/400/600) are order options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-15 filter regulator on its own.
AirTAC publishes flow for the G series as performance curves rather than one rated figure, so we do not state a single number. Share your line pressure and demand and we will confirm the datasheet curves for this 400-size, 1/2 in NPT set on request.
W selects the 5 um filter element instead of the standard 40 um element, for finer removal of particulate from the air stream. Filtration grade is the only difference it makes; drain, gauge, ports and regulator function are set by the other positions in the code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.