
The AirTAC JSID Double Rod Cylinder JSID125X350 is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 350mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses a symmetric piston layout to guarantee identical push and pull power. The G1/2 port feeds the air circuit, while the extruded hard-anodized aluminum profile barrel keeps the overall body more compact than a same-bore ISO 15552 unit. With a 350 mm stroke, the twin rods exit both covers to drive opposing tooling or provide anti-rotation guidance.
This non-magnet SKU cannot accept position sensors, so you must specify the -S variant if your machine needs CMSE or DMSE switches. Remember that the adjustable 33 mm cushions only decelerate the load near the end caps; they will not hold a suspended weight if air pressure drops.
| Model | Airtac JSID Double Rod Cylinder JSID125X350 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two opposing machining heads simultaneously from one piston, ensuring perfectly synchronized cutting cycles without phase drift.
Lifts heavy platiforms evenly from the center thanks to the equal both-ways force, preventing chassis twisting during vertical transfers.
Pushes pallets along a line where the dual rods prevent the pusher plate from yawing under high off-center loads.
When sizing this family, stepping down to the 100 mm bore yields 3574 N each way, whereas this 125 mm bore provides 5734 N at 0.5 MPa, sitting at the top of the range. Choose the double-rod architecture when your mechanism demands anti-twist stability, symmetric load distribution, or needs to mount a sensor cam on the back end. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Because this unit lacks the -S magnet, it cannot host reed or solid-state switches. Finally, for this 350 mm stroke, always support the load with external linear guides to prevent rod bending and premature seal wear.
AirtacDistr lists every JSID125 order code with its price on one page at https://airtacdistr.com/products/airtac-jsid125-double-rod-standard-cylinder
Quick checklist
Because the rod passes through both covers, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a theoretical max of 1169 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s, features a G1/2 port, and has a 33 mm adjustable cushion at each end.
No to both. The cushions only decelerate motion near the stroke end; they do not lock the piston, so you need an external rod lock or pilot-operated check valve to hold a load. Additionally, this specific SKU lacks a magnet, so it cannot take sensors—you must buy the -S version for CMSE or DMSE switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.