
The AirTAC JSID Double Rod Cylinder JSID125X350S is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 350mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses a single piston with a rod exiting each cover. The symmetric layout creates an equal pressure area on both faces, ensuring push and pull forces remain identical at 8028 N when running at 0.7 MPa. It carries a G1/2 port and an M27x2.0 rod thread.
Built to JIS standards with an extruded hard-anodized aluminium profile barrel, the body is noticeably shorter and more compact than a same-bore ISO 15552 cylinder. The -S suffix denotes a built-in piston magnet for direct CMSE or DMSE switches.
| Model | Airtac JSID Double Rod Cylinder JSID125X350S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two forming tools simultaneously from opposite rod ends, keeping the force perfectly balanced at 5734 N each way to prevent frame distortion.
Uses the dual-rod symmetry to lift and lower 292 kg vertical loads without twisting, eliminating the need for external linear guides in compact spaces.
Shifts a heavy diverting gate from either end, using the equal push and pull dynamics to maintain smooth tracking across the 350 mm travel.
This 125 mm bore sits at the top of the range, offering 5734 N each way at 0.5 MPa; if your application needs less force, step down to the 100 mm bore which provides 3574 N. A double-rod design is the right call when you need anti-rotation stability, twin tooling driven from both ends, or a symmetric load path. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S magnet enables position sensing. Because the stroke is 350 mm, you must support the load with external guides to prevent rod bending and manage side loads.
AirtacDistr lists every JSID125 order code with its price on one page at https://airtacdistr.com/products/airtac-jsid125-double-rod-standard-cylinder
Quick checklist
Because the rod passes through both covers, force is equal in both directions. It generates 5734 N at 0.5 MPa and 8028 N at 0.7 MPa, with a theoretical maximum of 1169 kgf at 1.0 MPa. The operating speed range is 30-500 mm/s. It uses a G1/2 port.
The -S suffix means it has a built-in magnet for CMSE or DMSE switches. However, a plain cylinder does not hold load on air loss; the 33 mm adjustable air cushions only decelerate near stroke end. For a vertical load, install an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.