
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The integrated G3/8 port and M18x1.5 rod thread keep pneumatic connections straightforward.
The -50S code equips the piston with a magnet for CMSE/DMSE sensors and provides a 50 mm external adjuster window to fine-tune the extend end position on site without swapping the cylinder. You can shorten the usable extend stroke from the 800 mm maximum down to 750 mm, while the retract end remains fixed. The adjustable air cushions provide 29 mm of deceleration at each end, though the cylinder will not hold a load on air loss without an external rod lock or pilot-operated check valve.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-50S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact 750 to 800 mm extend reach to push varying box sizes onto parallel conveyor lanes without repositioning the whole actuator assembly.
Fine-tune the stopping end position on-site by up to 50 mm to accommodate different pallet depths while using the G3/8 port for rapid actuation.
Lower a 79 kg tooling head over an 800 mm stroke, using the 29 mm adjustable cushions to soften the final landing impact safely.
The adjustable stroke is ideal for sharing a spare across stroke variants or dialing in exact end positions on-site. You can mount it using FA, LB, TC, TCM1, or TCM2 brackets. Because the 800 mm stroke is long, always use external guides to prevent rod bending and side-load damage. The -S option allows CMSE/DMSE sensors to drop directly into the side grooves for position detection.
AirtacDistr lists every JSIJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-jsij63-adjustable-double-rod-cylinder
Quick checklist
This 63 mm bore cylinder uses a G3/8 air port.
An external stop screw lets you shorten the extend stroke on-site by up to 50 mm, giving a usable extend range of 750 to 800 mm, with 800 mm being the maximum. The retract end is fixed, and the -S denotes a built-in magnet for CMSE/DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.