This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X225-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X225-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X225-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke225 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X225-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA
The AirTAC MAL32X225-S-CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 225mm stroke. It delivers 402N push and 346N pull at 0.5MPa, utilizing a Ø12mm carbon-steel rod with 20μm hard chrome plating. The exact drop-in replacement is the MBL32X225-S-CA, matching the original force, G1/8 port, and CA pivot mounting.
This legacy unit features a built-in magnet (-S) for position sensing with older CS1-M or DS1-M switches, whereas the MBL replacement uses current CMSG/DMSG/EMSG sensors. The original MAL body uses threaded front and back covers, while the newer MBL features a riveted rolling-packed body. Both rely on a fixed rubber bumper for end-of-stroke damping, not an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X225-S-CA |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X225-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X225-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×225 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA Is Used
Pallet Transfer Gate
Actuates a diverter gate on a packaging conveyor, using the 402N push force at 0.5MPa to shift heavy product cartons while the CA pivot absorbs lateral swing.
CNC Lathe Bar Feeder
Indexes stock material into a turning center, where the 225mm stroke provides the necessary travel and the CS1-M magnet confirms retraction.
Vertical Lift Storage
Raises a tote in an automated storage system; the 346N pull force safely lowers the load, though an external check valve is required to prevent drifting.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA with MBL32X225-S-CA
To replace the MAL32X225-S-CA, order the MBL32X225-S-CA. Confirm your 32mm bore, 225mm stroke, G1/8 port, PT thread, CA pivot back cover, and magnet are retained. Because the -S magnet is present, plan to upgrade your legacy CS1-M/DS1-M sensors to the CMSG/DMSG/EMSG family used by the MBL. If your application requires adjustable air cushioning instead of the fixed rubber bumper, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push at 0.5MPa. The 225mm stroke exceeds 300mm, so the thin 12mm rod is highly susceptible to bending under lateral stress. Utilize the CA pivot back cover to accommodate arcing loads, or install an external guide rail to prevent rod damage. Note that this cylinder cannot hold a load when air pressure is lost; add an external rod lock for safety.
Upgrade checklist
- ✓ Order the MBL32X225-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X225-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA FAQ
Yes, the MAL32X225-S-CA is discontinued. The exact drop-in replacement is the MBL32X225-S-CA, offering identical 32mm bore, 225mm stroke, CA pivot mounting, and G1/8 port. You must upgrade your sensors from the old CS1-M/DS1-M to the new CMSG/DMSG/EMSG family.
At 0.5MPa it provides 402N push and 346N pull. At 0.7MPa the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa. It uses a G1/8 port, a 12mm rod with M10x1.25 thread, and operates at 0.1-1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X225-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X225-S-CA → MBL32X225-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X225-S-CA replacement with price, stock and lead time, usually within 7-8 hours.