This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement MBL40X35CM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC MAL40X35CM (Discontinued) -> MBL40X35CM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 35mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the MBL40X35CM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X35CM is a discontinued double-acting aluminum mini round cylinder. As the largest bore in the MAL range, it delivers a robust 628 N push and 528 N pull force at 0.5 MPa. It features a 35 mm stroke, a G1/4 port, and a Ø16 mm carbon-steel rod with 20 um hard-chrome plating. The CM round-end back cover on this specific SKU provides a pivot-style interface that accommodates slight arcing motions, distinguishing it from rigid flat-end U models.
Because this legacy series is end-of-life, the direct replacement is the MBL40X35CM. The MBL shares the exact bore, stroke, 128 kgf max force, G1/4 port, and CM mounting. A key structural upgrade is the body construction: the MAL uses threaded front and back covers, whereas the MBL features a riveted rolling-packed body. Additionally, this specific SKU lacks a built-in magnet (-S), meaning it cannot accept any position sensor; if you ever need sensing on the MBL upgrade, you must order an -S version and use the modern CMSG, DMSG, or EMSG switches instead of the legacy CS1-M or DS1-M.
| Model | AirTAC MAL40X35CM (Discontinued) -> MBL40X35CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X35CM |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X35CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X35CM produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×35 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides a compact 628 N push at 0.5 MPa to knock out small plastic parts from tight mold cavities where a full-size cylinder will not fit.
Uses the 35 mm stroke and CM round-end pivot to actuate a short diverter gate on a packaging line, redirecting light cartons at high speed.
Drives a 40 mm bore clamping head against electronic test probes, applying 528 N pull force to secure a circuit board during functional testing.
To replace the MAL40X35CM, order the MBL40X35CM. Verify your 40 mm bore, 35 mm stroke, PT tapered port thread, and the CM round-end back cover. Because this SKU has no -S magnet, it cannot support a position sensor; if your machine now requires rod detection, step up to the MBL40X35CMS and migrate to CMSG/DMSG/EMSG switches. The MAL uses a fixed rubber bumper for end-of-stroke impact absorption; it is not an adjustable cushion, and it will not hold a load if air pressure drops. If you need precise end-speed control, look at the current MBLC variant for its adjustable air cushion.
When sizing, check the neighbours: stepping down to the 32 mm bore drops the 0.5 MPa push force to 402 N, while stepping up is impossible within the 20-40 mm MAL mini range (you would need a larger ISO profile cylinder). At 35 mm stroke, side-load risk is minimal, but always ensure the CM pivot and self-lubricating front-cover bearing guide are aligned to prevent rod binding.
Upgrade checklist
Yes, the MAL40X35CM is discontinued. The direct replacement is the MBL40X35CM. It matches the 40 mm bore, 35 mm stroke, G1/4 port, 128 kgf max force, and CM round-end cover. The MBL upgrades the body to a riveted rolling-packed design instead of the older threaded covers.
At 0.5 MPa it pushes 628 N and pulls 528 N; at 0.7 MPa it pushes 880 N; the max theoretical force is 128 kgf at 1.0 MPa. This specific SKU has no -S magnet, so it cannot take a position sensor. If you need sensing on the MBL replacement, order the -S version and use CMSG, DMSG, or EMSG switches.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X35CM replaces this model 1:1.
MBL replacements are usually dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Tell us the quantity and destination — we quote the direct MBL40X35CM replacement with price, availability and lead time, usually within 7 hours.