This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X40CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X40CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X40CM (Discontinued) -> MBL40X40CM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 40mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X40CM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X40CM is a discontinued double-acting aluminum mini round cylinder. It delivers 628 N push and 528 N pull force at 0.5 MPa through a 40 mm bore and 40 mm stroke. The exact drop-in replacement is the MBL40X40CM, matching the original bore, stroke, output force, G1/4 port, and CM round-end back cover for a seamless upgrade.
This legacy unit features a carbon-steel rod with 20 um hard chrome plating and a self-lubricating front-cover bearing guide. The older MAL body uses threaded front and back covers, whereas the modern MBL utilizes a riveted rolling-packed body. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor. The cylinder relies on a fixed rubber bumper, not an adjustable cushion.
| Model | AirTAC MAL40X40CM (Discontinued) -> MBL40X40CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X40CM |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X40CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X40CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×40 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Uses the 628 N push force at 0.5 MPa to knock finished plastic parts out of injection molds safely.
Employs the 40 mm stroke and CM round-end to pivot heavy glass bottles between packaging lanes.
Cycles at high speed to fold corrugated cardboard flaps on automated packaging machines.
To replace the MAL40X40CM, order the MBL40X40CM. Verify your 40 mm bore, 40 mm stroke, G1/4 port, and CM round-end back cover. The default PT tapered thread is retained. If your machine needs position sensing, note this SKU has no magnet; you must upgrade to an -S model and switch from the old CS1-M/DS1-M switches to the modern CMSG/DMSG/EMSG family. If you need end-of-stroke deceleration, step up to the MBLC which adds an adjustable air cushion the MAL never had.
For sizing, stepping down to the 32 mm bore drops thrust to 402 N push at 0.5 MPa, while stepping up is not an option as 40 mm is the largest MAL mini round bore. A plain MBL does not hold a load when air is lost; the rod drifts. For suspended loads, install an external rod lock or pilot-operated check valve.
Upgrade checklist
Yes, the MAL40X40CM is discontinued. The exact drop-in replacement is the MBL40X40CM. It matches the 40 mm bore, 40 mm stroke, 628 N push force, G1/4 port, and CM round-end back cover. You just order the MBL40X40CM.
The 40 mm bore generates 628 N push and 528 N pull at 0.5 MPa, 880 N push at 0.7 MPa, and a maximum 128 kgf at 1.0 MPa. Because this SKU lacks an -S magnet, it cannot take a position sensor. The MBL replacement uses CMSG/DMSG/EMSG switches if you add an -S.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X40CM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X40CM replacement with price, stock and lead time, usually within 7-8 hours.