This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X600CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X600CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X600CM (Discontinued) -> MBL40X600CM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 600mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X600CM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X600CM is a discontinued double-acting aluminum mini round cylinder featuring a 40mm bore and a 600mm made-to-order stroke. As the largest standard bore in this legacy series, it delivers a robust 628 N push force at 0.5 MPa. The exact drop-in replacement is the MBL40X600CM, matching the original 628 N output, G1/4 port size, and CM round-end back cover for a seamless retrofit.
This specific SKU lacks a built-in magnet, meaning it cannot accept a position sensor. During the upgrade, note that the older MAL body utilized threaded front and back covers, whereas the current MBL features a riveted rolling-packed body. Both designs rely on a fixed rubber bumper to soften end-of-stroke impacts, as the MAL never offered an adjustable air cushion.
| Model | AirTAC MAL40X600CM (Discontinued) -> MBL40X600CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X600CM |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X600CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X600CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×600 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Uses the 628 N push force at 0.5 MPa to shove heavy wooden pallets off a gravity roller conveyor, requiring the full 600mm stroke to clear the packaging zone.
Raises and lowers heavy warp beams on a loom using the 880 N force at 0.7 MPa, relying on the CM round-end back cover to pivot slightly and align the beam.
Actuates a 600mm vertical tier platform to stack packed cartons, depending on the 16mm rod and an external guide rail to handle the long-stroke side-load.
To replace the MAL40X600CM, order the MBL40X600CM. Verify your system's 0.1-1.0 MPa operating pressure and confirm the PT thread form along with the CM round-end back cover. Because this 600mm length exceeds the 500mm standard maximum, it is a non-standard, made-to-order stroke. At this length, the 16mm carbon-steel rod is highly susceptible to bending under side loads; you must use an external guide or a pivot mounting accessory to prevent rod damage. If you need to adjust the bore size, stepping down to the 32mm neighbor yields 402 N push at 0.5 MPa, while stepping up is not an option as 40mm is the largest available MAL bore. If your application requires precise end-of-stroke deceleration rather than a basic rubber bumper, step up to the current MBLC line which offers an adjustable air cushion. Remember that a plain MBL does not hold its load when air is lost; the rod will drift, so install an external rod lock or pilot-operated check valve for suspended loads.
Upgrade checklist
Yes, the AirTAC MAL40X600CM is discontinued. The exact drop-in replacement is the MBL40X600CM, which provides identical 40mm bore, 600mm stroke, G1/4 port, and CM round-end mounting. You simply order the MBL40X600CM to maintain the same output force and physical fit.
At 0.5 MPa it provides 628 N push and 528 N pull force, and 880 N push at 0.7 MPa, with a theoretical maximum of 128 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor; if sensing is needed, the MBL replacement with an S code uses CMSG, DMSG, or EMSG switches.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X600CM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X600CM replacement with price, stock and lead time, usually within 7-8 hours.