This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement MBL40X60CM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC MAL40X60CM (Discontinued) → MBL40X60CM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the MBL40X60CM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X60CM is a discontinued double-acting aluminum mini round cylinder delivering 628 N of push force at 0.5 MPa. Built for compact spaces, it features a 40 mm bore, a 60 mm stroke, and a G1/4 port. AirTAC replaced this legacy unit with the MBL40X60CM, a direct alternative retaining the exact force, port size, and CM round-end back cover.
This SKU lacks a magnet, so it cannot support position sensing. The original MAL body uses threaded front and back covers, whereas the modern MBL features a riveted rolling-packed body for equally robust performance. The 16 mm carbon-steel rod has a 20 um hard-chrome plating, guided by a self-lubricating front-cover bearing.
| Model | AirTAC MAL40X60CM (Discontinued) → MBL40X60CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X60CM |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X60CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X60CM produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides 628 N of push at 0.5 MPa to positively eject small plastic parts from tight mold cavities without requiring a full-profile ISO cylinder.
Uses the 60 mm stroke and CM round-end cover to actuate a diverting arm on a packaging line, handling boxes efficiently in confined machinery footprints.
Acts as a compact stop gate for lightweight pallets, utilizing the 880 N push force at 0.7 MPa to halt movement securely on an assembly conveyor.
To replace the MAL40X60CM, order the MBL40X60CM. Confirm your 40 mm bore, 60 mm stroke, G1/4 port, and CM round-end back cover. Because this specific SKU has no -S magnet, it cannot accept a sensor; if you require position detection, you must upgrade to an MBL variant with a magnet and use the current CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M.
If you need to adjust your force output, stepping down to the 32 mm bore yields 402 N of push at 0.5 MPa, while stepping up is not an option as 40 mm is the largest MAL mini round size. Note that the MAL relies on a fixed rubber bumper; if your application requires adjustable end-of-stroke cushioning, specify the MBLC variant on the current line. A plain cylinder does not hold a load when air pressure drops, so add an external rod lock for vertical safety.
Upgrade checklist
Yes, the MAL40X60CM is discontinued. The direct replacement is the AirTAC MBL40X60CM, which matches the 40 mm bore, 60 mm stroke, G1/4 port, and CM round-end back cover.
It delivers 628 N push and 528 N pull at 0.5 MPa, 880 N push at 0.7 MPa, and a maximum theoretical force of 128 kgf at 1.0 MPa. This specific SKU lacks a magnet, so it cannot support position sensors.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X60CM replaces this model 1:1.
MBL replacements are usually dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Tell us the quantity and destination — we quote the direct MBL40X60CM replacement with price, availability and lead time, usually within 7 hours.