
The AirTAC MBL40X75UT Mini Cylinder | 40mm Bore 75mm Stroke is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 75mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X75UT is a double-acting aluminum mini round cylinder engineered for compact machinery requiring a 75mm stroke. At 0.5 MPa it generates 628 N of push force and 528 N of pull force, making it well-suited for mid-range actuation tasks. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because it lacks the -S magnet suffix, a position sensor cannot be fitted to this specific unit. The riveted rolling-packed barrel design permanently crimps the covers to the tube, yielding a lighter footprint than tie-rod alternatives but preventing field disassembly.
Inside, a heterogeneous two-way piston seal actively retains grease for long service life, while the carbon-steel piston rod features 20 μm hard-chrome plating to resist wear and corrosion. End-of-stroke deceleration is handled by a fixed rubber bumper rather than an adjustable cushion screw; if your cycle demands heavier impact absorption, the MBLC variant offers adjustable pneumatic cushioning.
| Model | AirTAC MBL40X75UT Mini Cylinder | 40mm Bore 75mm Stroke |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes raw bar material into the collet with 628 N of force, fitting neatly within the tight clearance of a lathe enclosure.
Folds corrugated cardboard flaps on a continuous flow wrapper using the rigid U flat-end mount to maintain strict perpendicular alignment.
Actuates a diverting gate to separate depanelized circuit boards, relying on the 75mm stroke to clear the conveyor path quickly.
This 40mm bore provides 628 N of thrust at 0.5 MPa. If your assembly needs less force, the 32mm bore offers 402 N of push force. For heavier payloads, stepping up to the 50mm bore yields 981 N. Keep in mind that the plain MBL design relies on live air pressure to maintain position; the rod will drift or drop if pressure is lost or the valve centers, as the rubber bumper softens impacts but acts as neither a lock nor a brake. For holding loads without live air, utilize an external rod lock or pilot-operated check valve.
For replacement, match the 40mm bore, 75mm stroke, G1/4 port size, NPT thread form, U flat-end back cover, and no-magnet configuration. Because the stroke is under 300mm, side-load stress on the 16mm rod remains manageable, but always ensure rigid U-mount alignment to avoid premature seal wear.
Quick checklist
This 40mm bore cylinder uses a G1/4 port and a 16mm rod. It outputs 628 N push and 528 N pull at 0.5 MPa, 880 N push at 0.7 MPa, with a maximum theoretical force of 128 kgf at 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to soften end impacts, not an adjustable cushion screw. If your application requires adjustable pneumatic cushioning for heavier or faster cycles, select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.