
The AirTAC MBL50X175UT Mini Cylinder | 50mm Bore 175mm Stroke is a genuine double-acting aluminum-barrel mini round cylinder with a Ø50mm bore and 175mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL50X175UT is a double-acting aluminum mini round cylinder engineered for tight machine spaces where high thrust is still required. It delivers 981 N of push force and 881 N of pull force at 0.5 MPa, utilizing a 175 mm stroke to move heavier jigs or workpieces. The U suffix denotes a rigid flat-end rear cover, providing a solid fixed mounting footprint for straightforward inline pushing tasks.
Inside this riveted rolling-packed barrel, a heterogeneous two-way piston seal retains grease for long service life, while the Ø16 mm carbon steel piston rod features 20 µm hard-chrome plating to resist wear and corrosion. This specific SKU lacks the -S magnet option, meaning it cannot be fitted with a CMSG, DMSG, or EMSG position sensor. End-of-stroke impact is absorbed by a fixed rubber bumper rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC MBL50X175UT Mini Cylinder | 50mm Bore 175mm Stroke |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø50 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes heavy steel bar material through a spindle bushing using 981 N of force, where the 175 mm stroke provides sufficient travel to index the material accurately.
Folds cardboard end flaps on heavy product pallets in a compact packaging line, utilizing the rigid U flat-end mount to maintain a fixed pushing angle.
Diverts faulty glass beverage bottles off a high-speed conveyor belt, using the 0.15-1.0 MPa operating range to handle varying container weights.
If 981 N at 0.5 MPa is more force than your assembly requires, stepping down to the 40 mm bore drops the push force to 628 N and saves envelope space. Conversely, if your load demands more thrust, stepping up to the 63 mm bore increases the push force to 1558 N. Because the U back cover is rigid, this cylinder is ideal for straight-line actuation; if your mechanism requires angular movement, select a CA pivot cover instead. To replace this unit, match the 50 mm bore, 175 mm stroke, G1/4 port, NPT thread, U flat-end back cover, and no magnet.
With a 175 mm stroke on a mini round body, the unsupported Ø16 mm rod is susceptible to bending under side loads. For this length, you should use an external guide rail, pair the cylinder with a pivot mounting accessory, or consider the MBLD double-rod variant to prevent rod bearing wear. Remember that the fixed rubber bumper only softens end-of-stroke impacts; this cylinder will not hold a load if air pressure is lost, so add an external rod lock for vertical applications.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 981 N push force and 881 N pull force. At 0.7 MPa, the push force increases to 1374 N, with a theoretical maximum of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the base MBL50X175UT uses a fixed rubber bumper to absorb end-of-stroke impacts and does not feature an adjustable cushion screw. If your application requires adjustable air cushioning for heavier loads or faster speeds, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.