
The AirTAC MBL50X20SCAT Mini Cylinder | 50mm Bore 20mm Stroke is a genuine double-acting aluminum-barrel mini round cylinder with a Ø50mm bore and 20mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL50X20SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a robust 981 N push force at 0.5 MPa and a 1374 N push at 0.7 MPa, making this 20 mm stroke variant ideal for high-impact short-travel operations. The riveted rolling-packed aluminum barrel keeps the body light and permanently sealed, though it is not designed to be disassembled like a tie-rod cylinder.
This specific SKU includes a CA pivot (clevis) back cover that swings on a pin to accommodate arcing and angular loads, plus a built-in magnet (-S) for position detection. The rod is carbon steel with 20 μm hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for long service life. It uses a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC MBL50X20SCAT Mini Cylinder | 50mm Bore 20mm Stroke |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø50 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 981 N push force to knock stamped metal parts out of a die, where the CA pivot absorbs the slight angular offset of the ejection arm.
Swings a diverter blade on a packaging line over a 20 mm stroke, relying on the built-in magnet to confirm arm position for the PLC.
Acts as a short-stroke stop gate for incoming pallets, using the 1374 N push at 0.7 MPa to halt momentum while the clevis mount handles side-play.
If you need slightly less force, step down to the 40 mm bore (628 N push at 0.5 MPa), or step up to the 63 mm bore (1558 N push at 0.5 MPa) for heavier loads. Choose the MBLC variant if your cycle speeds require an adjustable air cushion instead of the standard fixed rubber bumper. Because this is a double-acting cylinder, it will not hold a load if air pressure is lost—you must add an external rod lock or pilot-operated check valve for fail-safe positioning.
This model matches a 50 mm bore, 20 mm stroke, G1/4 port size, NPT thread form, CA pivot back cover, and a built-in magnet. The -S magnet enables precise end-of-stroke sensing using AirTAC CMSG (reed) or DMSG and EMSG (solid-state) electronic switches.
Quick checklist
The 50 mm bore yields 981 N push and 881 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum theoretical force of 200 kgf at 1.0 MPa. It operates at 30-800 mm/s, uses a G1/4 port, and features a Ø16 mm rod with an M14x1.5 thread.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact. If your application requires adjustable air cushioning for heavier or faster moving loads, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.