
The AirTAC MBL50X30SCAT Mini Cylinder | 50mm Bore 30mm is a genuine double-acting aluminum-barrel mini round cylinder with a Ø50mm bore and 30mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL50X30SCAT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a robust 981 N push force at 0.5 MPa, making it well-suited for short 30 mm arcing or angular clamping tasks. Unlike an ISO 15552 profile cylinder, this compact riveted body prioritizes a small footprint over standardized mounting dimensions.
This SKU includes a built-in magnet (-S) for compatibility with AirTAC CMSG, DMSG, and EMSG sensor switches to track rod position. It features a CA pivot back cover that swings on a pin to absorb lateral arc loads. The body uses a heterogeneous two-way piston seal that retains grease for long service life, while the Ø16 mm carbon-steel rod is protected by 20 μm hard-chrome plating for wear resistance. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC MBL50X30SCAT Mini Cylinder | 50mm Bore 30mm |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 981 N push force and CA pivot swing to tuck heavy cardboard carton flaps on a rotary packaging line where the cylinder angle shifts during travel.
Leverages the 30 mm stroke and CA clevis to rapidly deflect small totes on a logistics conveyor, allowing the pivot mount to absorb side loads during the arc.
Employs the 881 N pull force to retract a short diverter blade that pushes mixed SKUs off a roller bed in tight distribution center spaces.
At 0.5 MPa, this 50 mm bore generates 981 N push and 881 N pull force. If you need less force, step down to the 40 mm bore (628 N push); if you require more, step up to the 63 mm bore (1558 N push). Choose the MBLC variant if your application requires an adjustable air cushion for heavier end-of-stroke impacts, as the base MBL uses a fixed rubber bumper. For single-acting spring-return needs, look at the MSBL or MTBL series.
This cylinder does not hold its load when air pressure is lost or the valve is centered; the rod will drift. Use an external rod lock or pilot-operated check valve if position holding is critical. For replacement, match the 50 mm bore, 30 mm stroke, G1/4 port, NPT thread, CA pivot back cover, and -S magnet.
Quick checklist
This 50 mm bore cylinder uses a G1/4 port and a Ø16 mm rod. It generates 981 N push and 881 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum theoretical force of 200 kgf at 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impacts, not an adjustable air cushion. If you need adjustable cushioning for faster speeds or heavier loads, select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.