
The AirTAC MBL50X60SCAT Mini Cylinder | 50mm Bore 60mm is a genuine double-acting aluminum-barrel mini round cylinder with a Ø50mm bore and 60mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL50X60SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a robust 981 N push force at 0.5 MPa and features a 60 mm stroke, making it well-suited for mid-range actuation where a larger profile cylinder will not fit. The riveted rolling-packed barrel keeps the overall body light and small, though it is not designed to be disassembled like a traditional tie-rod unit.
This specific SKU includes a built-in magnet (-S) for use with AirTAC CMSG reed and DMSG/EMSG solid-state sensor switches to track rod position. It is equipped with a CA pivot back cover that allows the cylinder body to swing freely on a pin, accommodating arcing or angular loads. The carbon-steel piston rod features a 20 um hard-chrome plating for high wear and corrosion resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC MBL50X60SCAT Mini Cylinder | 50mm Bore 60mm |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a guide arm on a pin via the CA pivot back cover to thread yarn, using the 981 N push force to maintain tension on a compact weaving loom.
Folds cardboard box flaps on a high-speed packaging line where the 60 mm stroke and DMSG electronic sensor verify proper closure for sealing.
Actuates a sorting diverter on a tight conveyor module; the compact riveted aluminum barrel fits between rollers while handling 881 N pull force.
For lower force requirements, stepping down to the 40 mm bore provides 628 N of push force at 0.5 MPa, while stepping up to the 63 mm bore yields 1558 N. This model uses a G1/4 port and a NPT tapered thread form. The CA pivot back cover is ideal for swinging mechanisms, but if a rigid fixed rear mounting is needed, the U flat-end variant is preferred. Keep in mind the base MBL uses a fixed rubber bumper to soften end-of-stroke impact; it is not an adjustable air cushion (choose the MBLC variant for that). Furthermore, this cylinder will not hold a load if air pressure is lost or exhausted—the rod will drift and drop, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 981 N of push force and 881 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a theoretical maximum of 200 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
No, the base MBL50X60SCAT uses a fixed rubber bumper to absorb end-of-stroke impact, not an adjustable cushion screw. If your application requires adjustable air cushioning for heavier or faster moving loads, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.