
The AirTAC MBL63X15SUT Mini Cylinder | 63mm Bore 15mm Stroke is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 15mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL63X15SUT is a double-acting aluminum mini round cylinder engineered for high-impact clamping in severely space-constrained machinery. Delivering a robust 1558 N of push force at just 0.5 MPa, this 63 mm bore unit features an ultra-short 15 mm stroke for rapid, high-force end moves. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, yielding a lightweight, compact body that is not designed to be disassembled like a traditional tie-rod cylinder. This specific SKU includes a U flat-end back cover for rigid, fixed mounting and a built-in -S magnet for position sensing.
Because this is the largest bore in the MBL family, it relies on a heterogeneous two-way piston seal that retains grease for long service life, paired with a carbon-steel piston rod hardened with 20 μm chrome plating to resist wear and corrosion. The integrated magnet allows you to mount CMSG reed or DMSG/EMSG solid-state sensor switches directly to the body for precise end-of-stroke detection. As a base MBL model, end-of-travel deceleration relies on a fixed rubber bumper rather than an adjustable cushion screw. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC MBL63X15SUT Mini Cylinder | 63mm Bore 15mm Stroke |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 1558 N push force to knock out dense plastic parts from tight mold cavities where a standard profile cylinder body would collide with the tie-bars.
Leverages the ultra-short 15 mm stroke to rapidly compress and seat microchips into sockets on a high-speed assembly line without overshoot.
Provides a heavy-duty 1457 N pull force to snap a heavy steel diverter gate shut on a packaging conveyor, fitting within the machine's narrow side frame.
Selecting this 63 mm bore provides maximum thrust for the MBL line, generating 1558 N push and 1457 N pull at 0.5 MPa. If you need slightly less force to prevent crushing delicate parts, step down to the 50 mm bore, which yields 981 N of push force. Stepping up beyond this size requires transitioning out of the mini round format to a larger profile cylinder. The fixed rubber bumper softens end-stroke impact but provides no position holding; if air pressure drops, the rod will drift and the load will drop, requiring an external pilot-operated check valve for safety.
This SKU is configured with NPT tapered port threads, a U flat-end rigid back cover, and a built-in magnet. The short 15 mm stroke keeps the Ø16 mm rod highly stable, minimizing side-load bending risks even under heavy impact loads.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1558 N push and 1457 N pull force. Increasing pressure to 0.7 MPa yields 2181 N push force, with a maximum theoretical limit of 318 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact and cannot be adjusted. If your 15 mm stroke application generates severe shock loads, upgrade to the MBLC variant, which features an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.