
The AirTAC MBL63X20UT Mini Cylinder | 63mm Bore 20mm Stroke is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 20mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL63X20UT is a double-acting aluminum mini round cylinder engineered for high-force actuation in severely space-constrained machinery. Delivering 1558 N of push force at just 0.5 MPa (and up to 2181 N at 0.7 MPa), this 63 mm bore unit uses a short 20 mm stroke to execute rapid, heavy-duty work like stamping or short-distance ejection. The U suffix designates a rigid flat-end rear cover, providing a solid, fixed mounting footprint that handles straight-line axial loads without inducing cylinder body sway.
Unlike tie-rod ISO 15552 profile cylinders, the MBL body features a riveted rolling-packed aluminum barrel where the front and rear covers are crimped directly to the tube, minimizing weight and footprint. Inside, a heterogeneous two-way piston seal retains grease for long service life, while the Ø16 mm carbon-steel piston rod features 20 µm hard-chrome plating to resist wear and surface corrosion. Because this specific SKU lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG position sensing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC MBL63X20UT Mini Cylinder | 63mm Bore 20mm Stroke |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Leverages the 1558 N push force at 0.5 MPa and 20 mm stroke to execute rapid, high-impact short-stroke forming of thin sheet metal enclosures.
Uses the 63 mm bore's 318 kgf maximum theoretical force to positively deflect heavy cast iron transfer cases off a high-speed packaging conveyor line.
Employs the rigid U flat-end back cover to securely lock a heavy PCB routing fixture in place, absorbing routing vibrations without pivot deflection.
If 1558 N at 0.5 MPa is more force than your application requires, stepping down to the 50 mm bore yields 981 N of push force while retaining the same G1/4 port and Ø16 mm rod. Conversely, the 63 mm bore is the largest available in the MBL series, so for even higher thrust demands you must transition to a larger profile cylinder. For applications needing end-of-stroke energy absorption for heavier moving masses, specify the MBLC variant, which replaces this model's fixed rubber bumper with an adjustable air cushion.
This MBL63X20UT configuration uses a NPT tapered port thread, a U flat-end back cover, and no magnet. Note that the fixed rubber bumper only softens end-of-stroke impact; it is not a locking mechanism. If the load must remain safely held in place when air pressure is lost or the valve is centered, an external rod lock or a pilot-operated check valve must be fitted to the system.
Quick checklist
At 0.5 MPa, the 63 mm bore provides 1558 N of push force and 1457 N of pull force. At 0.7 MPa, the push force increases to 2181 N. The maximum theoretical force is 318 kgf at 1.0 MPa.
No, because this specific SKU lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG sensor switches. To use position sensing, you must select an MBL63X20S variant with the magnet included.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.