
The AirTAC MBL63X450SUT Mini Cylinder | 63mm Bore 450mm is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 450mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL63X450SUT is a double-acting aluminum mini round cylinder engineered for heavy-duty clamping and lifting in confined machinery. Delivering 1558 N of push force at 0.5 MPa and 2181 N at 0.7 MPa, this 63 mm bore unit manages substantial loads over its 450 mm stroke. The U flat-end back cover provides a rigid fixed rear mounting for straight-line thrust, while the built-in -S magnet enables CMSG, DMSG, or EMSG sensor switches to track rod position.
Unlike tie-rod bodies, the MBL uses a riveted rolling-packed aluminum barrel that is permanently crimped at the factory, ensuring a lightweight, compact footprint that resists pneumatic leaks. The carbon steel piston rod features a 20 um hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for extended operational life. End-of-stroke deceleration relies on a fixed rubber bumper rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC MBL63X450SUT Mini Cylinder | 63mm Bore 450mm |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 1558 N of push force to eject dense plastic parts from tight mold cavities where a larger ISO cylinder cannot fit.
Utilizes the 450 mm stroke and built-in magnet to actuate a heavy diverter gate on a packaging line, confirming arm position via DMSG sensors.
Deploys a rigid U flat-end stop block to arrest heavy 318 kgf loaded pallets on a low-profile gravity roller conveyor.
This 63 mm bore generates 1558 N push and 1457 N pull at 0.5 MPa. If your assembly requires less force, the 50 mm bore offers 981 N push, whereas stepping up is not possible as 63 mm is the largest MBL size. For applications needing softer end-of-stroke deceleration at these high forces, select the MBLC variant which features an adjustable air cushion instead of the standard fixed rubber bumper.
With a 450 mm stroke, the Ø16 mm rod is highly susceptible to bending under side loads; an external guide rail or pivot mount is strongly recommended to prevent premature seal wear. Additionally, this plain double-acting cylinder will drift and drop its load if air pressure is lost or the valve is centered, as the rubber bumper is not a locking brake. Use an external pilot-operated check valve if position holding is required.
Quick checklist
This 63 mm bore cylinder provides 1558 N push and 1457 N pull at 0.5 MPa, 2181 N push at 0.7 MPa, and a maximum theoretical force of 318 kgf at 1.0 MPa. It uses a G1/4 port with a NPT thread form, a Ø16 mm rod, and an M14x1.5 rod-end thread.
No, the base MBL63X450SUT uses a fixed rubber bumper to soften end-of-stroke impacts and cannot be adjusted. If your application requires tunable cushioning for heavier moving masses, you must switch to the AirTAC MBLC variant which features an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.