verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke100 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$43.84 $51.34Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT

Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion. The Ø20 mm bore uses a 1/8" port and an M8x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments. Fixed TPU bumper pads absorb the impact at stroke ends, and the riveted construction keeps the housing compact.

Because the 157 N rating is a theoretical maximum, plan for a safe working load of about 94 N to account for friction and air pressure drops. That translates to lifting a 16 kg part, but applying a 2:1 safety margin means you should keep vertical loads around 8 kg. This SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG position switches without upgrading to the -S variant. Order code MI20X100CASDBT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke100 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT Is Used

conveyor_belt

Package Diverter Arm

Swings a lightweight sorting gate on a packaging line, using the CA clevis to pivot smoothly while pushing parcels under the 94 N safe working limit.

factory

Damp Environment Gate

Actuates a drainage valve or access hatch in a humid washdown area where the stainless steel barrel prevents the mild corrosion seen on standard aluminium bodies.

warehouse

Parts Ejector Mechanism

Pushes machined components off an assembly fixture, relying on the SDB pivot block to accommodate minor misalignment during the 100 mm ejection stroke.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT the Right Cylinder?

When sizing this 100 mm stroke actuator, check both neighbours: the Ø16 bore provides 100.5 N of push at 0.5 MPa, while the Ø25 bore offers 245.3 N if your payload exceeds the safe 94 N working load. The included CA rear clevis and SDB pivot block allow self-aligning mounting, which is critical for absorbing side loads on a 100 mm stroke. If your mechanism requires position feedback, select the -S magnet version instead, as this base model cannot host a sensor.

Remember that the fixed TPU bumpers only decelerate the piston near the end of travel; they do not function as an adjustable air cushion. Furthermore, if air pressure drops or the control valve centres, the rod will drift and drop the load. To prevent unintended movement on vertical lifts, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT FAQ

This Ø20 mm bore cylinder features a 1/8" port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum force of 32 kgf at 1.0 MPa.

Yes, the Ø20 mm bore uses the ISO 6432 mounting interface, so it drops into standard mini-cylinder brackets and clevises. However, this specific SKU lacks a magnet, meaning it cannot support CMSG, DMSG or EMSG switches unless you purchase the -S variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X100CASDBT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI20X100CASDBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.