verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X15CMT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke15 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$33.22 $40.72Save 18% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT

Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles short 15 mm strokes with precision. The riveted barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. It features a CM round rear cover and a 1/8" air port.

Because the 157 N rating is theoretical, plan for a safe working load of about 94 N of real work at 0.5 MPa. For vertical moves, that equates to lifting roughly 8 kg with a 2:1 safety margin. Fixed TPU bumper pads absorb the impact at stroke end, and since this specific SKU lacks a magnet, it cannot host CMSG or DMSG sensors without switching to the -S version. Order code MI20X15CMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke15 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×15Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT Is Used

precision_manufacturing

Clamping Small Housings

Secures die-cast aluminum parts during secondary machining, using the 15 mm stroke to quickly apply 94 N of safe holding force.

package_2

Film Roll Deflection

Acts as a compact tensioning pivot on packaging machinery, where the stainless steel barrel withstands daily washdowns.

factory

Ejector Gate Actuation

Provides a rapid 15 mm kick to clear small plastic components from an injection mold cavity between cycles.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT the Right Cylinder?

When sizing this 20 mm bore, dropping down to the Ø16 class reduces the push force to 100.5 N at 0.5 MPa, while stepping up to the Ø25 bore raises it to 245.3 N. The compact 15 mm stroke minimizes rod bending risks, though side loading should still be minimized. Its ISO 6432 mounting dimensions allow it to drop directly into standard mini-cylinder brackets and clevises.

Remember that venting the air supply causes the piston to drift, as the TPU pads only decelerate the end of travel rather than locking the rod. To prevent a dropped load during a pressure loss, install an external pilot-operated check valve or a dedicated rod lock. You can adapt the unit using LB foot, FA flange, or TC trunnion hardware.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT FAQ

This 20 mm bore cylinder features a 1/8" port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.

No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S magnet variant for position sensing. It relies on fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X15CMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI20X15CMT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.