verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X160CMT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke160 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$45.66 $53.16Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT

Generating 157 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles a 160 mm stroke with a 1/8" port and an M8x1.25 male rod thread. The riveted round-body construction pairs a stainless barrel and rod to resist mild corrosion, giving it a distinct edge over painted alternatives in damp or washdown environments. Fixed TPU bumper pads absorb the impact at stroke extremes, decelerating the piston smoothly without the complexity of adjustable cushioning.

Because it conforms to ISO 6432 mounting dimensions, the Ø20 body drops directly into standard mini-cylinder brackets and clevises. For practical sizing, plan for a safe working load of roughly 94 N—about sixty percent of the 0.5 MPa rating—which translates to lifting an 8 kg part vertically with a 2:1 safety margin. This specific CM round-end configuration lacks a magnet, so it cannot host CMSG, DMSG, or EMSG position switches without upgrading to the -S variant. Order code MI20X160CMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke160 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×160Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT Is Used

conveyor_belt

Package Diverters

Pushes lightweight cardboard cartons on a packaging line using 157 N of thrust, where the stainless body survives occasional washdowns.

warehouse

Parts Ejection

Ejects molded plastic parts from a tooling cavity, leveraging the 160 mm stroke to clear the mold base entirely before the next cycle.

science

Lab Sample Handling

Moves sample trays between testing stations in a humid laboratory environment, relying on the corrosion-resistant stainless barrel.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT the Right Cylinder?

When sizing this 160 mm stroke actuator, compare it against the neighboring bores: the smaller Ø16 yields 100.5 N of push at 0.5 MPa, while the larger Ø25 provides 245.3 N, helping you bracket the 157 N output of this Ø20 model. The CM round rear cover dictates a specific port and mounting orientation, so verify your spatial constraints against standard LB foot, FA flange, or TC trunnion accessories. Because this SKU has no internal magnet, position sensing is impossible here; order an -S suffix version if your control system requires CMSG, DMSG, or EMSG switches.

Keep in mind that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the fixed TPU bumpers only soften the end-of-stroke impact rather than locking the rod. If your assembly must hold a vertical load securely during an outage, integrate an external rod lock or a pilot-operated check valve. Additionally, the 160 mm stroke demands attention to side loading; ensure adequate guidance to prevent rod bending and premature seal wear over the extended travel distance.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT FAQ

This double-acting cylinder delivers 157 N push and 131.9 N pull at 0.5 MPa, increasing to 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa. It features a 1/8" air port and an M8x1.25 male rod thread.

The Ø20 body uses ISO 6432 mounting dimensions, so it fits standard mini-cylinder clevises and brackets directly. However, this specific configuration lacks a magnet, meaning it cannot support CMSG, DMSG, or EMSG switches; you must specify the -S variant for position sensing.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X160CMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI20X160CMT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.