
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X20UT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 20mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles brief 20 mm strokes with efficiency. The riveted barrel and rod shrug off mild corrosion, outlasting painted alternatives in damp or washdown environments. Its compact footprint includes a U-type back cover that presents the air port at a 90-degree angle for tight machinery layouts.
With a 1.0 MPa maximum pressure and a 1/8" port, the unit relies on fixed TPU bumper pads to decelerate the stroke end rather than adjustable cushions. Plan for a real working load of roughly 94 N, which lets you lift about 8 kg vertically with a 2:1 safety margin. Because this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG position switches. Order code MI20X20UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X20UT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Snaps out a 20 mm stroke to push light cardboard cartons off a packaging line, utilizing the 157 N push force to overcome guide friction.
Cycles a small process valve in humid plant environments where the stainless steel barrel prevents corrosion from ambient moisture.
Kicks completed plastic parts out of a molding fixture, lifting roughly 8 kg of tooling weight vertically with a safe 2:1 margin.
If your application requires less thrust, the Ø16 bore provides 100.5 N at 0.5 MPa, whereas stepping up to the Ø25 bore yields 245.3 N for heavier resistance. This Ø20 model strikes a balance with a 20 mm stroke that minimizes rod bending under side loads. The U-type rear cover simplifies plumbing in confined spaces by turning the port 90 degrees.
Remember that venting the air supply causes the piston to drift, as the TPU bumpers only soften end impacts and never act as a brake. To suspend a load securely during an air loss event, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
This 20 mm bore cylinder features a 1/8" port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet required for switches. You must select the -S variant to use CMSG, DMSG, or EMSG sensors. It uses the ISO 6432 mounting interface for standard brackets and features fixed TPU bumpers, not adjustable air cushions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.