
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X25SCAT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles short 25 mm strokes with precision. The integrated piston magnet allows direct mounting of CMSG, DMSG or EMSG reed switches for end-of-stroke confirmation. Its 1/8" port feeds the bore efficiently, while the fixed TPU bumper pads absorb the impact at stroke extremes without requiring manual adjustment.
Because the Ø20 mm body follows ISO 6432 mounting dimensions, it drops seamlessly into standard mini-cylinder brackets and clevises. The stainless barrel and rod resist mild corrosion, making it superior to painted alternatives in damp or washdown environments. For practical sizing, plan for roughly 94 N of usable work at 0.5 MPa, which means it can comfortably lift an 8 kg part vertically with a 2:1 safety margin. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X25SCAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates short-stroke sorting flaps on packaging conveyors, using the 157 N push force to redirect small cartons reliably.
Ejects misaligned items from a moving belt, where the 25 mm stroke and CA pivot mount accommodate slight angular misalignment.
Deploys a short 25 mm stop block to halt pallets at a workstation, benefiting from the stainless build in humid warehouse environments.
When sizing this actuator, compare it against its neighbours: a Ø16 bore provides 100.5 N of push at 0.5 MPa, while stepping up to a Ø25 yields 245.3 N. This Ø20 model sits perfectly in the middle for moderate push tasks. The CA rear pivot cover is ideal for applications requiring angular alignment during the stroke extension.
Note that the fixed bumpers only decelerate the piston near the end of travel; they do not function as a brake. If your system loses air or the valve is centred, the rod will drift, so add an external pilot check valve or rod lock to hold a suspended load securely. Position detection requires the built-in -S magnet, as standard non-magnet versions cannot accept sensors.
Quick checklist
At 0.5 MPa it provides 157 N push and 131.9 N pull. At 0.7 MPa it delivers 219.8 N push and 184.7 N pull. The theoretical maximum force is 32 kgf at 1.0 MPa. The air port size is 1/8".
No, the fixed TPU bumper pads only decelerate the piston at the stroke end and do not act as a lock. If air is lost, the rod will drift. For vertical loads, install an external rod lock or pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.