verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X300CMT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ20 mm
  • Stroke300 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionFixed TPU bumper pads
$56.54 $64.04Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI20 stroke, mounting and version on one page All MI20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT

Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 300 mm stroke with a CM round end cover. The 1/8" port feeds the 8 mm piston rod, while fixed TPU bumper pads absorb the impact at stroke extremes without offering adjustable cushioning. Its riveted stainless barrel shrugs off mild corrosion, outlasting painted alternatives in damp production areas.

For real work, plan around 94 N of usable load at 0.5 MPa, which translates to lifting an 8 kg part vertically with a 2:1 safety margin. Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG or EMSG sensors. The Ø20 body conforms to ISO 6432 mounting dimensions, ensuring it drops directly into standard mini-cylinder brackets and clevises. Order code MI20X300CMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ20 mm
Stroke300 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N185 N
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT

MIISO 6432 round-body mini cylinder (double-acting).
20Bore size in mm.
×300Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT Is Used

conveyor_belt

Packaging Line Diverter

Pushes light cartons at 157 N on a packaging conveyor, using the 300 mm stroke to shift products cleanly between adjacent belt lanes.

factory

Textile Loom Tensioner

Moves a yarn guide bar through a 300 mm cycle, relying on the stainless steel barrel to resist humid textile mill environments.

warehouse

Bin Lid Actuator

Raises and lowers access hatches on storage bins, where the CM round end cover and ISO 6432 dimensions simplify rear pivot mounting.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT the Right Cylinder?

When sizing this 300 mm stroke unit, the neighbouring Ø16 bore provides 100.5 N of push at 0.5 MPa for lighter duties, whereas stepping up to the Ø25 bore yields 245.3 N for heavier loads. A 300 mm extension on an 8 mm rod demands careful alignment; excessive side loading will bend the rod, so utilize FA flange or TC trunnion mounts to preserve straight tracking. To sense piston position, you must select the -S magnet variant, as this base configuration cannot accept a switch.

Remember that venting the air supply causes the piston to drift, as the TPU bumpers only decelerate the end of travel and act as neither a brake nor a lock. To suspend a vertical load safely during an air loss event, fit an external pilot-operated check valve or a dedicated rod lock.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT FAQ

This 20 mm bore cylinder features a 1/8" port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.

No, this specific SKU lacks an internal magnet and cannot accept CMSG, DMSG or EMSG switches. You must order the -S variant for position sensing. The unit uses fixed TPU bumper pads for end-of-stroke deceleration and follows ISO 6432 mounting dimensions.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X300CMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI20X300CMT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.