
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X400SUT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 400 mm stroke with ease. The Ø20 mm bore uses a 1/8 inch port and an M8x1.25 male rod thread. Its riveted stainless barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. Fixed TPU bumper pads absorb the impact at stroke extremes without offering adjustable cushioning.
Because the bore falls within the Ø8 to Ø25 range, it uses the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. The built-in piston magnet supports CMSG, DMSG and EMSG switches for position sensing. For practical sizing, plan for roughly 94 N of actual work at 0.5 MPa, which equates to lifting about 8 kg vertically with a 2:1 safety margin. Order code MI20X400SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X400SUT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 400 mm stroke to push cartons between adjacent conveyor lanes, relying on the 157 N push force to shift heavy boxes without stalling.
Deploys the U 90-degree back cover for compact side mounting, maintaining yarn tension in humid textile facilities where the stainless build resists mild corrosion.
Cycles totes forward in gravity flow racks, using the CMSG sensor magnet to confirm the full 400 mm extension before the downstream pick sequence begins.
When sizing this 400 mm stroke model, compare it against its neighbours: the smaller Ø16 bore yields 100.5 N of push at 0.5 MPa, while the larger Ø25 bore provides 245.3 N. If your application demands high-speed cycling with heavy loads, consider the MIC variant for its adjustable air cushion, as the base MI relies solely on fixed TPU pads. The U back cover provides a 90-degree port and mounting orientation, which helps in tight machinery enclosures.
A 400 mm stroke on an Ø20 bore generates leverage, so ensure your front mounting guides the load to prevent rod bending and premature seal wear. Remember that a standard double-acting cylinder drifts when air is lost or the valve is centred; the bumper only decelerates the end of stroke and will not hold a suspended load. Install an external rod lock or a pilot-operated check valve if you need strict position holding.
Quick checklist
This Ø20 mm bore cylinder features a 1/8 inch port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
No, a standard double-acting cylinder drifts if air is lost or the valve centres; the fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. You must add an external rod lock or pilot check valve to hold a suspended load. Furthermore, the -S magnet allows CMSG, DMSG and EMSG switches for position feedback.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.