
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X450SUT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 450mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles long 450 mm strokes with a compact round-body design. The riveted stainless barrel and Ø8 mm rod resist mild corrosion, making it highly suitable for damp production areas where painted steel would degrade. Its 1/8" port supplies air to both extend and retract the piston, while fixed TPU bumper pads absorb the impact at each stroke end.
Because the 450 mm stroke demands careful alignment, plan for a safe working load of about 94 N (roughly 60% of the 0.5 MPa rating) to account for friction. Vertically, this translates to lifting around 8 kg safely with a 2:1 margin. The built-in piston magnet allows seamless integration with CMSG, DMSG, or EMSG switches for position sensing, and the U-type back cover provides a 90-degree mounting option for tight machine frames. Order code MI20X450SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X450SUT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes light cardboard cartons across a 450 mm transfer gap with 157 N of force, utilizing the 90-degree U cover to mount flush against the conveyor frame.
Extends the stainless-steel rod to position yarn guides in humid environments, relying on the built-in magnet to trigger DMSG sensors at stroke end.
Sweeps molded plastic components out of a press area, lifting parts under 8 kg vertically while the fixed TPU bumpers quietly absorb the rapid retraction impact.
When sizing this 20 mm bore, compare it against adjacent options: a 16 mm bore yields 100.5 N of push at 0.5 MPa, while stepping up to a 25 mm bore provides 245.3 N. Choose this model when your application requires moderate force over an extended 450 mm distance. Because the stroke is long, ensure your mounting prevents rod side-loading to avoid premature seal wear and bending.
The U-type rear cover allows for 90-degree pivot mounting, complementing standard LB foot, FA flange, and TC trunnion brackets. Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered—the TPU bumpers only decelerate the stroke end and do not act as a brake. To suspend a load safely during an air loss event, install an external rod lock or a pilot-operated check valve.
Quick checklist
This 20 mm bore cylinder features a 1/8" air port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum force of 32 kgf at 1.0 MPa.
No, it uses fixed TPU bumper pads to decelerate the stroke end rather than an adjustable air cushion. It does conform to ISO 6432 mounting dimensions for Ø20, allowing it to drop into standard mini-cylinder brackets, and the -S suffix means it contains a magnet for CMSG, DMSG, or EMSG sensors.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.