
The AirTAC MI16-20 Stainless Steel Mini Cylinder MI20X80UT is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles an 80 mm stroke with a 1/8" port. The riveted barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp washdown zones. Its fixed TPU bumper pads absorb stroke-end impact without needing adjustment.
Because the 157 N rating leaves a safety margin, plan for roughly 94 N of actual work at 0.5 MPa. This translates to lifting about 8 kg vertically with a 2:1 safety factor. The rear U cover mounts at 90 degrees for compact lateral port routing, while the Ø20 body uses the standard ISO 6432 mounting interface to fit common mini brackets. Order code MI20X80UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X80UT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging conveyor, using the 157 N push force to redirect small cartons at high speed.
Maintains wrapping tension on a packaging line, where the stainless build withstands humid cleaning environments.
Pushes machined plastic parts out of a mold cavity, relying on the 90-degree U cover to keep airlines tight against the machine frame.
When sizing this 80 mm stroke model, verify your load against the 131.9 N pull force at 0.5 MPa. If you need less power, the Ø16 bore provides 100.5 N push; stepping up to the Ø25 yields 245.3 N. For this 80 mm length, keep side-load forces minimal to avoid bending the Ø8 rod. The U-style rear cover simplifies spatial constraints by orienting the air supply at 90 degrees.
This SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG position switches. If sensing is required, select an -S variant. Remember that venting the air causes the piston to drift, as the TPU pads only decelerate the stroke end rather than locking the load.
Quick checklist
This double-acting cylinder uses a 1/8" port and generates 157 N push / 131.9 N pull at 0.5 MPa, and 219.8 N push / 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa.
No, this specific SKU lacks a piston magnet, so it cannot accept CMSG, DMSG or EMSG switches. You must order an -S variant for sensing. The cylinder uses the ISO 6432 mounting interface and fixed TPU bumper pads for deceleration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.