
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X100SCAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial workloads within a compact footprint. The riveted stainless barrel and rod shrug off mild corrosion, making it far superior to painted alternatives in damp or washdown environments. Because this 25 mm bore uses the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises without redesign.
Equipped with a built-in magnet, the unit supports CMSG, DMSG, and EMSG position switches for precise end-of-stroke confirmation. Fixed TPU bumper pads absorb the impact at stroke extremes to protect the mechanism. For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a safe 2:1 margin. The 1/8 inch port supplies air efficiently to the 10 mm piston rod. Order code MI25X100SCAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X100SCAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing gate on a packaging line, using the 245.3 N push force to swing heavy cardboard cartons onto secondary tracks at high speed.
Deploys a 100 mm stroke physical stop barrier to halt pallets at a loading station, relying on the CA clevis to accommodate slight angular misalignment.
Adjusts fabric guide rollers in humid textile manufacturing, where the stainless steel construction prevents rust from constant moisture exposure.
When sizing this 25 mm bore unit, consider the adjacent options: a 20 mm cylinder provides 157.0 N of push at 0.5 MPa, while stepping up to a 32 mm bore yields 402.2 N. This model includes a CA pivot clevis back cover, ideal for articulating loads, and the -S magnet enables electronic or reed sensor tracking. Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centered; the TPU bumpers only decelerate the stroke end and will not lock the load. To suspend a vertical weight safely, install an external rod lock or a pilot-operated check valve. With a 100 mm stroke, ensure the mounting configuration avoids excessive side loading to prevent premature rod bending.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it yields 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8 inch.
No, the piston will drift if air pressure is lost or the valve is centered. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. You must use an external rod lock or pilot check valve to hold a vertical load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.