
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X100SCMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work within a compact footprint. The riveted barrel and Ø10 mm rod shrug off mild corrosion, making it highly suitable for damp washdown environments where painted alternatives fail. It includes a built-in piston magnet for position sensing and uses a CM round rear cover for straightforward orientation. Operating on a 1/8" air port, the unit conforms to ISO 6432 mounting dimensions for Ø25 bores, ensuring it drops directly into standard mini-cylinder brackets and clevises.
Fixed TPU bumper pads absorb the impact at each stroke end, though they decelerate rather than provide adjustable cushioning. For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa, which translates to safely lifting a 12.5 kg load vertically with a 2:1 margin. The -S magnet enables direct mounting of CMSG, DMSG or EMSG switches for precise end-of-stroke detection. Order code MI25X100SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X100SCMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a logistics sorting line, using the 245.3 N thrust to push parcels firmly into the correct chute.
Secures aluminium housings during machining, relying on the 100 mm stroke to clear the workpiece for robotic loading.
Drives the mechanical arms that tuck top flaps prior to sealing, benefiting from the stainless build in humid packing rooms.
When sizing this 25 mm bore, compare it against its neighbours: a 20 mm bore yields 157.0 N push at 0.5 MPa, while stepping up to a 32 mm bore provides 402.2 N. This model hits a strong middle ground for medium-force clamping and lifting. The 100 mm stroke is well within the 500 mm maximum, but always ensure the load is guided to prevent side-loading and rod bending over the travel distance.
Because it is a standard double-acting cylinder, the piston will drift if air pressure is lost or the control valve is centred; the TPU bumpers only soften the end-of-travel impact and do not act as a locking brake. To suspend a load safely during an air failure, incorporate an external pilot-operated check valve or a dedicated rod lock. Mounting options include LB foot, FA flange, SDB pivot and TC trunnion styles.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
Yes, the -S suffix indicates a built-in magnet, allowing you to mount CMSG, DMSG or EMSG switches for detection. However, the cylinder does not hold its load if air is lost; the piston drifts. You must add an external rod lock or pilot check valve to hold a load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.