
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X10CMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles short 10 mm shifts with precision. The riveted barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp washdown zones. Its 1/8" port feeds the chamber efficiently, while the CM round end cover keeps the rear profile smooth for tight mounting spaces.
Because the bore uses the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises. Plan for roughly 147 N of actual work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb the impact at stroke extremes, though they decelerate rather than act as an adjustable air cushion. Order code MI25X10CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10CMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 245.3 N push force to grip aluminium housings firmly on a CNC machining line without over-traveling.
Deploys the 10 mm stroke to tuck carton flaps rapidly on a packaging conveyor before tape application.
Acts as a compact 25 mm bore barrier to halt workpiece pallets momentarily under a 1/8" air supply.
When sizing this 25 mm bore, the smaller 20 mm option yields 157.0 N push at 0.5 MPa, whereas stepping up to the 32 mm bore provides 402.2 N. This makes the 25 mm unit the sweet spot for medium-duty clamping. Note that if air pressure drops or the valve is centred, the piston will drift and drop the load; the bumpers only soften the end of travel and do not function as a brake. For suspended loads, specify an external pilot check valve or rod lock.
This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG position switches. If you need sensing, select the -S variant. The 10 mm stroke minimizes rod bending, but always verify lateral load limits. You can pair it with LB foot, FA flange, SDB pivot or TC trunnion mounts.
Quick checklist
The 1/8" ported 25 mm bore generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this SKU lacks the internal magnet required for CMSG, DMSG or EMSG switches. You must choose the -S variant for position sensing. The unit relies on fixed TPU bumper pads for end-of-stroke deceleration, not an adjustable cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.