verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke10 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$39.26 $46.76Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation in tight spaces. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its riveted stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments.

The built-in piston magnet (-S) directly supports CMSG, DMSG and EMSG switches for position sensing, while the CA rear cover provides a pivot clevis for angular movement. Plan for roughly 147 N of actual work at 0.5 MPa, which means it can safely lift about 12.5 kg vertically with a 2:1 margin. Fixed TPU bumper pads absorb the stroke-end impact across the brief 10 mm travel. Order code MI25X10SCAT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke10 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×10Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT Is Used

precision_manufacturing

Clamping Housings

Uses its 245.3 N thrust to grip aluminium die-cast parts securely on a machining fixture before secondary milling.

conveyor_belt

Diverter Gate

Pivots a short 10 mm stroke via the CA clevis to push small packaged boxes onto a secondary packaging line.

science

Lab Sample Stop

Acts as a precise physical end-stop for automated test tubes in a sterile, washdown-resistant stainless steel assembly.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT the Right Cylinder?

When sizing this 25 mm bore, dropping down to a 20 mm cylinder lowers the push force to 157 N at 0.5 MPa, whereas stepping up to a 32 mm bore raises it to 402 N. The CA clevis back cover suits pivoting loads, but remember that a plain cylinder drifts if air pressure drops or the valve is centred; the TPU bumpers only decelerate the end of stroke and never act as a lock. To hold a vertical load securely, install an external rod lock or a pilot-operated check valve. With just a 10 mm stroke, side-load and rod-bending risks are minimal, but ensure the pivot alignment is true to avoid binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT FAQ

This double-acting cylinder pushes 245.3 N and pulls 206.1 N at 0.5 MPa. At 0.7 MPa, push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. It features a 1/8" air port and a 10 mm piston rod.

Yes, the -S suffix indicates a built-in magnet compatible with CMSG, DMSG and EMSG switches. The CA back cover acts as a pivot clevis for angular mounting. It uses standard ISO 6432 mounting dimensions, and fixed TPU bumpers decelerate the stroke end without adjustable cushioning.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X10SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.