
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X10SCMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MI25X10SCMT is a double-acting stainless-steel round-body mini cylinder built for compact actuation. The 25 mm bore uses a 1/8" port and a 10 mm stroke, making it ideal for very short movements. Its riveted stainless barrel and rod shrug off mild corrosion, giving it a real edge over painted-steel or aluminium minis in damp, food, or outdoor environments. Fixed TPU bumper pads absorb the stroke-end impact, decelerating the piston smoothly without the complexity of an adjustable cushion.
Because it conforms to ISO 6432 mounting dimensions, this cylinder drops directly into standard mini-cylinder brackets and clevises, simplifying spares and design. The -S suffix means a piston magnet is fitted, ready for CMSG, DMSG, or EMSG position switches. For practical sizing, plan for about 147 N of real work at 0.5 MPa, which means it lifts roughly 12.5 kg vertically with a 2:1 safety margin. The CM round end cover completes the rear profile for clean mounting. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X10SCMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 10 mm stroke and 245.3 N push force to grip aluminium extrusions securely in CNC machining fixtures without overtravel.
Snaps sorting flaps into position on packaging lines, relying on the stainless build to withstand washdown and humid factory conditions.
Deploys a 12.5 kg vertical lift capacity to halt corrugated cartons on a gravity roller conveyor before palletising.
When sizing this 25 mm bore, compare it directly with its neighbours: a 20 mm bore yields 157.0 N push at 0.5 MPa, while stepping up to a 32 mm bore provides 402.2 N. The MI25X10SCMT sits in the middle, offering 245.3 N push and 206.1 N pull at 0.5 MPa, striking an excellent balance for medium-duty clamping. Its 10 mm stroke is inherently rigid, minimising rod-bending side loads. If your application must hold a vertical load when air is removed or the valve is centred, note that this plain cylinder will drift; the bumper pads only soften the end of travel and act as neither a lock nor a brake. For secure load holding, specify an external rod lock or a pilot-operated check valve. You can mount it using LB foot, FA flange, SDB pivot, or TC trunnion hardware, and the CM back cover offers a rounded rear profile.
Quick checklist
The 25 mm bore has a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes. The -S suffix indicates a built-in piston magnet compatible with CMSG, DMSG, and EMSG switches. Additionally, the 25 mm bore conforms to ISO 6432 mounting interface dimensions, allowing it to fit standard mini-cylinder brackets and clevises perfectly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.