
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125CAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 125 mm stroke tasks. The Ø25 bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. Its riveted stainless barrel and rod resist mild corrosion, outperforming painted steel in damp or washdown environments. Fixed TPU bumper pads absorb end-of-stroke impact, while the rear CA pivot cover suits angular movement.
For real-world sizing, plan for roughly 147 N of usable work at 0.5 MPa, or vertically lifting about 12.5 kg with a 2:1 safety margin. The 1/8" port and M10x1.25 male rod thread match standard pneumatic fittings. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches; order a -S variant if sensing is required. Order code MI25X125CAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125CAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Drives a 125 mm swing gate on a packaging line, using the rear CA clevis to pivot and redirect heavy cartons smoothly.
Maintains consistent fabric tension in humid textile manufacturing, leveraging the stainless steel rod to resist mild corrosion.
Extends 125 mm to push components onto a lower pallet tier, safely moving loads up to 12.5 kg vertically.
When sizing this 245.3 N (0.5 MPa) unit, compare it against the smaller Ø20 bore, which offers 157.0 N, or step up to the larger Ø32 bore providing 402.2 N if your payload is heavier. The 125 mm stroke is well within the 500 mm maximum standard limit, keeping the unit readily available without made-to-order delays. At this stroke length, ensure your front mounting guides the load to prevent rod side-loading and premature seal wear.
The rear CA clevis is perfect for pivoting mechanisms, but remember that a standard double-acting cylinder drifts when air is removed or the valve is centered. The TPU bumpers only decelerate the stroke end; they do not lock the rod. To suspend a load safely mid-stroke, install an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it yields 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
No. This SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG switches. Additionally, the fixed TPU bumper pads only decelerate the stroke end; they do not lock or hold the load. Use an external rod lock for position holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.