
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125SCATCT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust 125 mm stroke tasks. The riveted barrel and Ø10 mm rod shrug off mild corrosion, making it superior to painted alternatives in damp or washdown settings. It features a 1/8" port and an M10x1.25 male rod thread.
Built with an internal magnet for CMSG, DMSG or EMSG switches, the unit uses standard ISO 6432 mounting dimensions for easy bracket integration. Fixed TPU bumper pads absorb stroke-end impacts. For practical sizing, plan for roughly 147 N of usable work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a safe 2:1 margin. Order code MI25X125SCATCT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125SCATCT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a 600 mm wide logistics belt, using the 125 mm stroke to push cartons weighing up to 12 kg into secondary sorting lanes.
Drives a heated sealing bar down onto flexible film pouches, applying up to 147 N of working force to ensure airtight seams on food packaging lines.
Mounts via the TC trunnion to swing and eject moulded plastic parts from a press bed, relying on the stainless build to resist high-humidity plant environments.
This Ø25 bore provides 245.3 N push and 206.1 N pull at 0.5 MPa. If you need less force, the Ø20 drops to 157.0 N push; stepping up to the Ø32 yields 402.2 N. The included CA rear clevis and TC trunnion give you pivot flexibility, while the internal -S magnet supports position sensing.
Because the 125 mm stroke is well within the 500 mm maximum, side-load stress is moderate, but always align the rod to prevent bending. Remember that venting the air causes the piston to drift, as the TPU pads only decelerate the end of travel rather than locking the load. Use a pilot check valve to hold a suspended weight.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it delivers 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
No, the piston will drift if air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. You must add an external rod lock or pilot-operated check valve to hold a suspended load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.