
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125SCMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work for its footprint. The Ø25 bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. Its stainless barrel and piston rod resist mild corrosion, giving it an edge over painted steel in damp or washdown environments.
The integrated piston magnet (-S) supports CMSG, DMSG and EMSG switches for position sensing, while the CM round end cover neatly manages rear port orientation. Fixed TPU bumper pads absorb stroke-end impact without the complexity of adjustable cushioning. For real-world tasks at 0.5 MPa, plan for around 147 N of usable working load, which equates to lifting about 12.5 kg vertically with a 2:1 safety margin. Order code MI25X125SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125SCMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes medium-weight cartons off a main conveyor belt using the 245.3 N thrust available at 0.5 MPa.
Secures aluminium extrusions during CNC machining, safely applying around 147 N of holding force.
Raises small material bins through a 125 mm stroke, easily handling parts weighing up to 12.5 kg.
When sizing this 125 mm stroke unit, the smaller Ø20 bore provides 157.0 N push at 0.5 MPa, whereas stepping up to the non-ISO Ø32 bore yields 402.2 N. This model includes the -S magnet for sensing and the CM round back cover. If your application requires adjustable air cushioning for high-speed cycles, consider the MIC variant instead of the base MI. Because the 125 mm stroke extends the Ø10 rod, check side loading to avoid rod bending.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered; the TPU bumpers only decelerate the stroke end and do not function as a locking brake. To suspend a load safely during an air failure, fit an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" (NPT on this code) and the male rod thread is M10x1.25.
No, the piston will drift if air is lost or the valve is centered. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. To hold a vertical load securely, you must add an external rod lock or a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.