
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125SRT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion tasks. The Ø25 bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel or aluminium minis in damp, food, or outdoor environments. Fixed TPU bumper pads decelerate the stroke end to reduce impact wear.
Because the piston pushes with 245.3 N at 0.5 MPa, you can plan for roughly 147 N of real work, which safely lifts about 12.5 kg vertically with a 2:1 margin. The built-in magnet (-S) supports CMSG, DMSG, and EMSG switches for position sensing, while the R back cover provides an axial-in port orientation. This riveted construction remains compact and light, and its ISO 6432 mounting interface drops directly into standard mini-cylinder brackets and clevises for easy design integration. Order code MI25X125SRT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125SRT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging conveyor, using the 245.3 N push force to deflect medium-weight cartons at high speed.
Adjusts yarn tension bars in a textile machine, leveraging the 125 mm stroke and stainless build to withstand humid manufacturing conditions.
Extends a pneumatic applicator head to press labels onto pallets, relying on the ISO 6432 mounting brackets for secure positioning.
When sizing this 125 mm stroke model, the smaller Ø20 bore provides 157.0 N of push at 0.5 MPa, whereas stepping up to the larger Ø32 bore yields 402.2 N. The Ø25 hits a strong middle ground for medium-force tasks. The -S magnet pairs directly with CMSG, DMSG, or EMSG sensors, and you can mount it using LB foot, FA flange, SDB pivot, or TC trunnion hardware alongside the CA, U, R, or CM back covers. At a 125 mm stroke, keep side-load forces minimized to prevent rod bending and premature seal wear.
A plain double-acting cylinder drifts when air is lost or the valve is centered, as the TPU bumpers only soften the stroke end rather than locking the piston. If your application must hold a vertical load safely during a pressure drop, add an external rod lock or a pilot-operated check valve to the system.
Quick checklist
This double-acting cylinder uses a 1/8" air port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
The base MI uses fixed TPU bumper pads that decelerate the stroke end, not an adjustable air cushion (see the MIC variant for that). However, the -S magnet in this model fully supports CMSG, DMSG, and EMSG electronic or reed switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.