
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125SRTCT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion tasks. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. Its stainless barrel and piston rod resist mild corrosion, offering a real advantage over painted alternatives in damp or washdown environments.
Equipped with a built-in piston magnet (-S), it supports CMSG, DMSG and EMSG switches for position sensing. The riveted construction features fixed TPU bumper pads that decelerate the piston at stroke ends. Plan for a safe working load of roughly 147 N of real work at 0.5 MPa; alternatively, it lifts about 12.5 kg vertically with a 2:1 safety margin. The 1/8" port and M10x1.25 male rod thread ensure solid pneumatic and mechanical connections. Order code MI25X125SRTCT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125SRTCT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging conveyor, using the 245.3 N push force to swing heavy cardboard cartons into a secondary lane.
Drives a sealing jaw assembly with a 125 mm stroke, relying on the fixed TPU bumpers to soften the impact at the crimping point.
Pushes completed machined components off an assembly table, safely lifting parts weighing up to 12.5 kg vertically before diverting them.
When sizing this 125 mm stroke model, compare it against its neighbours: the Ø20 bore yields 157.0 N push at 0.5 MPa, while the larger Ø32 provides 402.2 N. This model includes a TC trunnion mount and an R axial-in rear cover, giving you flexible pivot or fixed orientation options. Because this is a 125 mm stroke, watch for rod bending under heavy side loads and ensure proper guiding. The -S magnet enables CMSG, DMSG or EMSG sensors, whereas a standard SKU without the S suffix cannot take a switch.
Remember that a plain double-acting cylinder drifts when air is lost or the valve is centred. The TPU bumpers only soften the end-of-stroke impact and act as neither a brake nor a position lock. To suspend a load safely mid-stroke, fit an external rod lock or a pilot-operated check valve.
Quick checklist
The Ø25 mm bore has a 1/8" port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, or 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the -S suffix means it has a piston magnet for CMSG, DMSG and EMSG switches. However, it does not hold position on air loss; the fixed TPU bumpers only decelerate the stroke end, so you need an external rod lock or pilot check valve to suspend a load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.