
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125SUT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 125 mm stroke tasks. The Ø25 bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments. The riveted construction keeps the body compact, while fixed TPU bumper pads absorb the impact at stroke ends.
Because the piston pushes with 245.3 N at 0.5 MPa, you can plan for a safe working load of roughly 147 N of real work. In vertical lifting terms, that translates to hoisting about 12.5 kg with a 2:1 safety margin. The built-in magnet (-S) supports CMSG, DMSG and EMSG position switches, and the U back cover provides a 90-degree port and mounting orientation for tight machinery layouts. Order code MI25X125SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125SUT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, using the 125 mm stroke to push cartons onto an adjacent belt with reliable 245.3 N force.
Raises lightweight moulded plastic trays by 125 mm, safely hoisting a 12.5 kg payload thanks to the 2:1 safety margin at 0.5 MPa.
Cycles a process valve in a damp food-production cell, where the stainless steel rod and barrel prevent the mild corrosion seen on standard units.
When sizing this 125 mm stroke unit, the Ø20 bore below offers 157.0 N of push at 0.5 MPa, whereas stepping up to the Ø32 yields 402.2 N. The Ø25 hits a sweet spot for medium-force automation. If your mechanism must maintain its vertical position during an air loss or valve centre, note that this standard cylinder will drift; the fixed TPU pads only decelerate the stroke end rather than locking the load. You should add an external rod lock or pilot-operated check valve for secure holding.
The 125 mm stroke exposes the Ø10 mm rod to side loads, so align your mounting carefully to prevent rod bending. You can use LB foot, FA flange, SDB pivot or TC trunnion brackets alongside the U-type back cover. For higher cycling speeds that need end-of-stroke tuning, consider the MIC variable cushion variant instead of this fixed bumper model.
Quick checklist
This double-acting cylinder has a 1/8" port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes. The Ø25 bore uses the ISO 6432 mounting interface, so it drops directly into standard mini-cylinder clevises and brackets. The -S suffix means it has an internal magnet ready for CMSG, DMSG or EMSG reed and electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.