
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125SUTCT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work in a compact footprint. The riveted stainless barrel and Ø10 mm rod shrug off mild corrosion, making it far superior to painted alternatives in damp or washdown settings. Plan for a safe working load of roughly 147 N, which means it can comfortably lift about 12.5 kg vertically with a 2:1 safety margin.
Because the Ø25 bore adheres to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises. This specific SKU includes a built-in piston magnet for position sensing, uses a 1/8" port, and relies on fixed TPU bumper pads to decelerate the stroke end. It is configured with a U-type 90-degree rear cover and a TC trunnion mount for pivoting articulation. Order code MI25X125SUTCT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125SUTCT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Swings a diverter gate on a packaging line using the TC trunnion mount, easily handling the 12.5 kg vertical equivalent force needed to re-route boxed goods.
Maintains consistent fabric tension in humid textile manufacturing, leveraging the stainless steel construction to resist mild corrosion from ambient moisture.
Acts as a pneumatic stop for incoming pallets, using the 245.3 N push force at 0.5 MPa to arrest momentum before the fixed TPU bumpers absorb the final impact.
When sizing this 125 mm stroke unit, consider the neighbouring bores: a Ø20 provides 157 N of push at 0.5 MPa, while stepping up to a Ø32 yields 402 N. If your mechanism experiences air loss or the valve is centred, the piston will drift and drop the load, as the TPU bumpers only soften the end-of-stroke impact rather than locking the rod. To maintain vertical position, integrate an external rod lock or a pilot-operated check valve.
The TC trunnion mount paired with the U-type back cover suits articulated pivoting linkages. The built-in -S magnet supports CMSG, DMSG, and EMSG switches for end-of-stroke confirmation. On a 125 mm stroke, minimize side-loading to prevent rod bending and premature seal wear.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it yields 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
No, the piston will drift if air is lost or the directional valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. To hold a suspended load, you must add an external rod lock or a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.