
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X125UT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion tasks. The 125 mm stroke operates at speeds from 30 to 800 mm/s, while the integrated 90-degree U back cover simplifies perpendicular port routing and mounting. Its stainless barrel and rod resist mild corrosion, making it highly suitable for damp or washdown environments where painted steel alternatives degrade.
Because the bore uses the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises for straightforward design integration. The 1/8" port and M10x1.25 male rod thread provide secure fittings for this force class. For practical sizing, plan for about 147 N of real work at 0.5 MPa, which means it lifts roughly 12.5 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb stroke-end impact, though this SKU lacks a magnet and cannot host CMSG, DMSG or EMSG sensors. Order code MI25X125UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X125UT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes lightweight cardboard cartons off a main packaging line at 90 degrees using the U-style rear cover for tight side-mounting clearances.
Maintains consistent fabric tension by extending a 125 mm stroke against a guide bar, leveraging the 245.3 N push force to keep fibres taut.
Ejects processed fluid vials from a testing carousel, relying on the stainless steel construction to withstand chemical splashes and frequent wipe-downs.
When sizing this 25 mm bore, the neighbouring 20 mm option provides 157 N of push at 0.5 MPa, while stepping up to the 32 mm bore yields 402 N, giving you clear boundaries for adjusting your force budget. The 125 mm stroke is well within the 500 mm maximum standard limit, keeping the unit readily available. Keep in mind that a plain double-acting cylinder drifts if air pressure drops or the valve is centred; the TPU pads only decelerate the stroke end and act as neither a lock nor a brake. To suspend a load safely, incorporate an external rod lock or a pilot-operated check valve into your circuit. Furthermore, because this specific configuration lacks the -S magnet, position sensing is impossible without upgrading to the -S variant.
Quick checklist
This 25 mm bore cylinder features a 1/8" air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a piston magnet, so it cannot accept CMSG, DMSG or EMSG magnetic switches. You would need to select the -S variant of this round-body mini cylinder to enable switch tracking along the stainless steel barrel.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.