
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X150CAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread, extending 150 mm on each cycle. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. Built to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises.
Plan for about 147 N of actual work at 0.5 MPa, which safely lifts roughly 12.5 kg vertically with a 2:1 margin. The riveted body keeps the unit compact, while fixed TPU bumper pads absorb stroke-end impact. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to an -S variant. Order code MI25X150CAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150CAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Swings a sorting gate on a packaging line using the CA pivot mount, relying on the 245 N push force to deflect heavy cartons at high speed.
Maintains downward pressure on a wrapping film spindle, where the stainless construction prevents mild corrosion from humid packing environments.
Extends 150 mm to secure aluminium extrusions during a cutting operation, using the 12.5 kg vertical lift capacity to hold the part steady.
When sizing this 25 mm bore, the smaller Ø20 generates 157 N of push at 0.5 MPa, whereas stepping up to the Ø32 yields 402 N. The 150 mm stroke is well within the 500 mm maximum, though at full extension you should watch for side-loading to avoid bending the Ø10 mm rod. The rear CA clevis accommodates pivoting articulation.
Because it relies on fixed TPU bumpers rather than an adjustable air cushion, the MIC variant is better for high-speed energy absorption. This base MI will drift if air pressure drops or the valve is centred, so fit an external rod lock or pilot check valve if your application must hold a load safely in place.
Quick checklist
This Ø25 mm bore cylinder features a 1/8" port and an M10x1.25 rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot support CMSG, DMSG or EMSG switches. You must select the -S magnet variant for position sensing. It uses the ISO 6432 mounting interface and fixed TPU bumper pads rather than an adjustable cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.