
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X150CMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion across its 150 mm stroke. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. The CM round rear cover provides a clean back-end profile for compact assemblies.
At 0.5 MPa, plan for a safe working load of roughly 147 N of actual work rather than the absolute maximum rating. For vertical lifting, that translates to hoisting about 12.5 kg with a sensible 2:1 safety margin. This SKU lacks the -S magnet, so it cannot host CMSG, DMSG or EMSG sensors; add the -S variant if you require position detection. Fixed TPU bumper pads decelerate the piston at the stroke ends, and the 1/8" air port feeds the chamber efficiently. Order code MI25X150CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150CMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a logistics conveyor to push 12 kg cartons onto a secondary belt, utilising the 150 mm stroke and 245.3 N thrust.
Raises and lowers a rinsing nozzle in a damp pharmaceutical environment, where the stainless steel rod resists mild corrosion from repeated water exposure.
Maintains tension on a fabric guide arm, using the CM round end cover and ISO 6432 mounting dimensions to fit neatly into existing clevis brackets.
When sizing this bore, stepping down to a Ø20 mm yields 157.0 N of push at 0.5 MPa, while stepping up to a Ø32 mm provides 402.2 N, helping you bracket your exact force needs. The 150 mm stroke is well within the 500 mm maximum standard limit, though at this extension you should watch for side-loading and rod-bending forces to prevent premature seal wear. Because the base MI relies on fixed TPU bumpers rather than an adjustable air cushion, consider the MIC variable-cushion variant if you operate at the top of the 30-800 mm/s speed range and need gentler end-of-stroke deceleration. Without a -S suffix, this specific unit cannot accept magnetic switches.
Remember that venting the air or centering the valve causes the piston to drift, as the bumper pads only soften the end impact and do not function as a brake. If your application must hold a vertical load statically, install an external rod lock or a pilot-operated check valve. You can mount this cylinder using LB foot, FA flange, SDB pivot or TC trunnion hardware to suit your frame.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
No, this specific SKU lacks a magnet and cannot accept CMSG, DMSG or EMSG switches. You must select the -S variant (MI25X150CMS) to enable position sensing. The unit features fixed TPU bumper pads for end-of-stroke deceleration and conforms to ISO 6432 mounting dimensions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.