verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X150RT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke150 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$48.35 $55.85Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work in compact spaces. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. Fixed TPU bumper pads absorb the impact at stroke extremes without offering adjustable cushioning.

For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa to maintain a safe margin, which equates to lifting about 12.5 kg vertically. The rear R cover features an axial-in port orientation. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. Order code MI25X150RT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke150 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT Is Used

conveyor_belt

Package Diverter Gate

Actuates a routing flap on a packaging line, using the 245.3 N push force to deflect heavy cartons onto a secondary belt.

science

Lab Washdown Station

The stainless barrel withstands mild cleaning chemicals while extending 150 mm to lower a test fixture into a rinsing bath.

warehouse

Pallet Stopper Arm

Deploys a mechanical stop to halt pallets on a gravity roller conveyor, relying on the rear R axial port to keep hoses neatly aligned.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT the Right Cylinder?

When sizing this 150 mm stroke model, verify your load against the 245.3 N push and 206.1 N pull figures at 0.5 MPa. If you need less force, the Ø20 bore provides 157.0 N push, while stepping up to the Ø32 bore yields 402.2 N. The 150 mm stroke is well within the 500 mm maximum for this bore, but at this length you should watch for side loads that could bend the Ø10 mm rod. The ISO 6432 mounting interface on this Ø25 bore lets you drop the cylinder straight into standard mini-cylinder brackets, foot mounts (LB), flanges (FA) or TC trunnions.

Remember that venting the air or centering the valve causes the piston to drift, as the TPU pads only soften the end of travel rather than locking the rod. Fit an external rod lock or pilot check valve if your application must hold a load statically. For high-speed cycles requiring adjustable deceleration, consider the MIC variant instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT FAQ

At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.

No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for sensing. It uses fixed TPU bumper pads for deceleration rather than an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150RT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X150RT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.