
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X150SCALBT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion across its 150 mm stroke. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. Its stainless barrel and piston rod resist mild corrosion, offering a distinct advantage over painted alternatives in damp or washdown settings.
Fixed TPU bumper pads absorb impact at the stroke ends to protect the mechanism, operating at speeds of 30-800 mm/s. For practical sizing, plan for roughly 147 N of real work at 0.5 MPa, which means it can safely lift about 12.5 kg vertically with a 2:1 safety margin. This SKU includes a built-in magnet for position sensing and uses a 1/8 inch port. Order code MI25X150SCALBT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150SCALBT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, utilizing the 245.3 N push force to redirect heavy cartons efficiently.
Pushes lightweight bearings into housings over a 150 mm travel, relying on the fixed TPU bumpers to soften the assembly impact.
Drives a sorting paddle in a humid distribution center, where the stainless steel rod and barrel prevent mild corrosion.
When sizing this 245.3 N unit, the smaller Ø20 bore provides 157.0 N, while the larger Ø32 bore steps up to 402.2 N at 0.5 MPa. This model features an LB foot mount and a CA rear pivot cover for versatile mechanical anchoring. Because the -S magnet is present, you can directly mount CMSG, DMSG, or EMSG switches for end-of-stroke detection.
Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centered; the TPU bumpers only soften the end-of-stroke impact and do not function as a locking brake. To suspend a load safely during an air loss event, incorporate an external rod lock or a pilot-operated check valve into your circuit. The 150 mm stroke is well within the 500 mm maximum, though side loading should still be minimized to prevent rod bending.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it delivers 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8 inch.
Yes, the -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG switches. The cylinder does not hold its load if air is lost; the piston drifts, and the fixed TPU bumper pads only decelerate the stroke end. Use an external rod lock or pilot check valve for load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.