
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X150UT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 mm bore uses a 1/8" port and a 10 mm rod with an M10x1.25 male thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments. Fixed TPU bumper pads absorb the impact at stroke extremes without offering adjustable cushioning.
For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa, which safely lifts about 12.5 kg vertically with a 2:1 margin. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. The rear U cover provides a 90-degree port orientation, simplifying hose routing in tight machinery layouts. Order code MI25X150UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X150UT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes sorting flaps on a packaging conveyor using its 245.3 N thrust to redirect heavy cartons without stalling.
Maintains thread tension via the 90-degree U rear cover, routing air lines cleanly away from moving loom mechanisms.
Acts as a robust physical stop for incoming pallets, absorbing the impact via fixed TPU pads during automated stacking.
When sizing this 150 mm stroke model, compare it against its neighbours: the Ø20 bore generates 157.0 N push at 0.5 MPa, while the larger Ø32 provides 402.2 N. If your application loses air or the valve centres, this plain cylinder will drift and cannot hold a load—the TPU bumpers only decelerate the end of travel, so add an external rod lock or pilot check valve for secure holding. The 150 mm stroke is well within the 500 mm maximum, but ensure your mounting brackets support the rod to prevent side-load bending.
The ISO 6432 mounting interface on this Ø25 bore drops directly into standard mini-cylinder brackets and clevises. You can pair the body with LB foot, FA flange, SDB pivot or TC trunnion hardware. If you require position feedback, select the -S magnet variant instead of this non-magnetic base model.
Quick checklist
This Ø25 mm bore cylinder features a 1/8" port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the Ø25 bore uses the ISO 6432 mounting interface, compatible with standard LB, FA, SDB and TC brackets. However, because this specific SKU lacks a magnet, you cannot mount CMSG, DMSG or EMSG sensors; choose the -S variant for sensing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.