verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X15CMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke15 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$36.84 $44.34Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles brief 15 mm strokes with precision. The riveted barrel and rod shrug off mild corrosion, making it superior to painted alternatives in damp environments. Its fixed TPU bumper pads absorb the impact at stroke ends without offering adjustable cushioning.

Because it conforms to ISO 6432 mounting dimensions, the unit drops directly into standard mini-cylinder brackets and clevises. Plan for roughly 147 N of actual work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a safe 2:1 margin. The CM round end back cover keeps the 1/8" port orientation clean for tight assemblies. Note that this specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG or EMSG sensors. Order code MI25X15CMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke15 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×15Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT Is Used

precision_manufacturing

Short-Stroke Part Ejection

Uses the 245.3 N push force to rapidly kick machined aluminium parts out of a fixture on an automated lathe.

package_2

Flap Deflection

Deploys a 15 mm rapid tap to fold cardboard flaps on a packaging line before the sealing head applies tape.

conveyor_belt

Gate Diverting

Pivots a small sorting gate on a conveyor to route lightweight plastic bottles into the correct packing lane.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT the Right Cylinder?

When sizing this 25 mm bore, stepping down to a 20 mm cylinder drops the 0.5 MPa push force to 157 N, while jumping up to a 32 mm bore raises it to 402 N. This model hits a solid middle ground for compact ejection tasks. Keep in mind the fixed TPU bumpers only soften the stroke end; they do not function as a lock. If your process must hold a load vertically during an air loss or valve centre, add an external rod lock or pilot-operated check valve to prevent drift.

With a very short 15 mm stroke, side-load and rod-bending stresses are minimal, but ensure the M10x1.25 male rod thread aligns perfectly with the load. The CM round end back cover pairs well with FA flange or LB foot mounts. For high-speed cycling that requires adjustable deceleration, consider the MIC variable cushion variant instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT FAQ

This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.

No, this specific SKU does not include the -S magnet, so it cannot host CMSG, DMSG or EMSG switches. You would need the -S variant for sensing. It uses fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion, and its ISO 6432 mounting dimensions fit standard mini-cylinder brackets.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15CMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X15CMT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.